The item up for bidding is a Brand New
0.5HP/370W Submersible Bore Water Pump
with starter box and water proof tape (for cable joint).
15M Submersible Power Cable Come With This Package.
Stainless Steel Grade 304 and Copper Alloy Inlet/Outlet (Won't rust. use a magnet to test it whether are true stailess steel)
This particular water pump is designed for domestic and clean water use.
Option:
Power cable: Free 15M 1mm x 4 wires submersible power cable, Extra cable cost $1.8 per metre .
Automatic water level detect control box: +$90
Features;
The Pump is suitable for a 4"/100mm or large bore well. It is suited to wells varying from 20m deep to 68m deep; performing at its best when depth is between 15m-55m.It also can be used to pump water from dams or rivers. Maximum delivery: 2,0000L/h water.
It also suitable for generator.
litre per minute Depth of Bore or Well
8 lpm 62m
10 lpm 61m
16 lpm 55m
20 lpm 50m
25 lpm 41m
30 lpm 37m
33 lpm 32m
Technical details;
Power Rating: 0.5HP/370W
Current: 3.6A
Voltage: Single phase 240V/50Hz
Degree of Protection: IP68
Outlet: 1.25"
Weight: 13.5Kg
Motor Characters;
Conform to international standard of IEC34-ICE, whole blocked asynchronous motor squirrel cage rotor.
Outer shell, shaft and bottom made of stainless steel.
Copper alloy upper and bracket
Sweden SKF thrust bearing undertaken higher thrust load.
Italy BT seals.
Pressure automatic adjusting device made of oil and waterproof reformed butyl rubber.
Flange connector conform to the standard of NEMA
Lacquer-coated wire conformed to USA standard of NEMA MW37-C.
Degree of protection: IP68
Insulation: Class B
Water PH: 6.5-8.0
Electric submersible pumps are:
The impellers and the diffusers are in high intensity plastic material.
Delivery door and suction support in alloy copper.
Shaft (431#), Coupling (329#), Pump body (304#) are stainless steel.
Check valve: In plastic.
Bolt and nut: In stainless steel.
The bearings are in ceramic/rubber lubricated by the water circulation.
Check valve is incorporated in the delivery body with threaded outlet. The coupling Pump-motor is according to NEMA regulations.
Freight:
| Postage and Handling |
Price |
|
NSW,ACT |
$28 |
| VIC,CBD of QLD,SA |
$35 |
| CBD of WA,TAS |
$48 |
-
-
-
-
- The prices(all freight is insured) set out are aimed at people situated around CBD areas.
- For those living in more remote areas, we recommend you to give us a postcode and obtain a quote before you bid as there may be a $10-$20 price difference. The postage and handling fee will be indicated when bidding has been finalised.
Warranty: 3 months back to base warranty.
Back to Search Results
) 
bmk966
Print
Report item
