|
|
12.6" Dia. 60" L Supertec G32P-150CNC OD GRINDER, Fanuc
 12.6" Dia. 60" Length Supertec G32P-150CNC OD GRINDER, Fanuc Oi-TC CNC
Ref #: 137673 iammdna XNEWOD
NEW SUPERTEC CNC UNIVERSAL CYLINDRICAL GRINDER
12.6" x 60" MODEL G32P-150CNC w/Straight Wheelhead
NOTE: PHOTO SHOWS G30A-50CNC MODEL
FEATURES:
- FANUC Oi-TC CNC control, Fanuc AC drives and servo motors,
with 2 year Fanuc warranty.
- Heavily ribbed box-type base is made of Meehanite
castings, providing excellent rigidity to ensure machine
stability.
- Table is fully supported in the full travel to avoid overhang.
- Hydraulics, coolant and lubrication systems are separated
from machine to eliminate vibration and dissipate heat.
- Generously proportioned, the enlarged and properly sloped
drainage troughs underneath the wheelhead base provides rapid
coolant drainage needed during heavy duty grinding and prevents
thermal distortion of base.
- Sturdy rigid-designed workhead is electronically controlled
giving variable spindle speeds. Workhead swivels 90°CCW to 30°CW
for various grinding operations. A dual oil seal and cover
prevents coolant seepage into the workhead.
- The design of the tailstock is both rigid and robust. Housed
in a cast body, the hardened nitralloy steel sleeve is designed
to carry a MT4 center for G32/G38 and a MT3 Center forG20/G25.
- An Optional hydraulic tailstock with foot pedal is available
for easy loading and unloading of parts.
- A combination of hydrostatic and hydrodynamic bearings,
surrounded by a high pressure oil film, eliminates metal to metal
contact to provide high rigidity as well as high vibration
damping performance. (Except G20P/G25P)
- A pressure switch interlock prevents spindle start-up until
oil pressure is established. This pressure switch interlock also
stops the spindle if oil pressure fails.
- The One V and one flat hand-scraped guideways are Turcite
coated and incorporated with an automatic lubrication system,
precision ballscrew, AC servo motor and a 0.000004” linear
feedback system to ensure smooth movement of the wheelhead for
superior positioning accuracy and repeatability.
- The Rigid table with box-type structure travels on a cushion
of oil with no metal-to-metal contact.
- Z-axis positioning accuracy and repeatability is assured with
an AC servo motor and high precision, pre-tensioned ballscrews.
- A swiveling table dial indicator enables rapid cylindricity
corrections and taper grinding applications.
- Slideways, ballscrews and spindle are continuously lubricated
by an auto-lube system to ensure long service life and maintain
maximum accuracy.
- A highly-automated grinding system can be customized with a
wide selection of optional equipment…including an automatic OD
sizing device, gap control, crash control and touch probe for axial
positioning.
- The hinged, swing-down internal grinding attachment (optional)
swings down into working position easily and quickly. A patented
locking device adds safety as it prevents the ID attachment from
swinging down abruptly. (Except G32A/38A Series)
SPECIFICATIONS:
GENERAL CAPACITY
Swing over table: 12.6”
Distance between centers: 60"
Max. grinding diameter: 12”
Max. load between centers: 330 lbs
GRINDING WHEEL
Diameter x Width x Bore: 18”x 2”x 6”
Wheel speed: 1390 rpm
Max. peripheral speed: 109 ft/sec
WHEELHEAD
Sliding angle: 90 degrees
Automatic rapid traverse: 236 in/min
Infeed travel: 9”
Min. increment infeed: 0.000010”
TAILSTOCK:
Quill Travel 1”
Center taper: MT4 (option MT5)
WORKHEAD:
Spindle speed (variable): 30~350 rpm
Center taper: MT4 (option MT5)
Spindle type: Fixed & Rotary
Diameter of bore: 0.91”
INTERNAL GRINDING SPINDLE
Spindle speed: 12000/18000 rpm (std.) or 25000 rpm (opt.)
Max. grinding bore: 1.18”-3.94" or 0.79” - 1.97"
Max. grinding length: 4.33” or 2.17"
Max. chucking length: 8" ~ 12.4”
Max. chucking diameter: 6”
TABLE:
Swiveling angle 7 degrees
(C.C.W):
Rapid feederate: 0-393 in/min
Min. increment feed: 0.0001”
MOTORS
Wheel spindle motor: 7.5 HP
Workhead motor: 2 HP
Hydraulic pump: 2 HP
Lubrication pump: .25 HP
Coolant pump: .25 HP
Wheelhead (X axis) Motor [Fanuc]: 0.8 HP
Table (Z Axis) Motor [Fanuc]: 0.8 HP
MACHINE
Net weight (Semi-enclosed): 11960 lbs
Gross weight including packing: 13060 lbs
Packing dimension: 209”x 85”x 89”(L x W x H)
STANDARD ACCESSORIES:
- FANUC Oi-TC CNC Controller
- Diamond dresser
- Table dial gauge
- Wheel extractor
- Halogen lamp
- Balancing stand w/ arbor
- Infinite variable workhead
- Grinding wheel w/ flange
- Semi-enclosed splash guard
- Leveling screws w/ blocks
- Operation manual with parts list
- Tool box w/ adjusting tools
- Coolant system w/ magnetic separator
- Carbide tip centers
- Lube oil temperature regulator (G32A/G38A)
SPECIAL OPTIONS AND ACCESSORIES (call for pricing):
AUTOMATION SYSTEMS
- Hydraulic tailstock
- SBS Dynamic balance system (include factory installation)
- MARPOSS Crash control
- MARPOSS Gap control
- MOVOMATIC Auto sizing device (0.4" - 2.4")
- MARPOSS Auto sizing device (0.4" - 3.15")
- MARPOSS Touch probe
BACK PLATES & SCROLL CHUCKS:
- 3-Jaw scroll chuck (4") (must order with 4” back plate)
- 3-Jaw scroll chuck (5") (must order with 5” back plate)
- 3-Jaw scroll chuck (6") (must order with 6” back plate)
- 3-Jaw scroll chuck (8") (must order with 8” back plate)
- 4-Jaw independent chuck (8") (must order with 8” back plate)
- 4-Jaw independent chuck (6") (must order with 6” back plate)
- 5C Back plates
- Regular Back plates (various sizes depending on chuck)
- Fixed back plates (various sizes depending on chuck)
COOLANT SYSTEMS (upgrades from the std. coolant):
- Coolant sys. w/mag. separator & paper filter (20L/min, 80L)
- Coolant system w/paper filter (20L/min, 80L)
- Coolant sys. w/mag. separator & paper filter (60L/min, 140L)
- Coolant system w/paper filter (60L/min, 140L)
COLLETS & COLLET CLOSERS:
- Royal manual lever type 5C collet closer
- Royal air-operated 5C collet closer (must order w/air control)
- Kit w/hand-operated valve for air 5C (must order with air 5C)
- Kit w/foot-operated valve for air 5C (must order with air 5C)
- Lyndex 5C collets (sizes from 3/64” - 1 1/8”)
DRESSING & GRINDING ATTACHMENT
- 2-Point diamond dresser
- 3-Point diamond dresser
- Internal grinding attachment
STEADY RESTS
- 2-Point steady rests (various sizes)
- 3-Point steady rests (various sizes)
OTHER ACCESSORIES
- Grinding wheels
- Spare wheel flanges
- Lube oil temperature regulator
- 460V Transformer (15KVA)
- Full enclosure splash guard w/oil & mist separator
Machine Location: HARRISON, NJ
Click Here For More Supertec Machines
Click Here For More Grinders, Lappers & Hones - NEW CYLINDRICAL GRINDERS(s)
Questions about this Machine?
Call Kori at (800) 873-6224 ext 7555
Need a Freight rate?
Call Alex, our recommended trucking and shipping broker at (973) 732-3274
 |
Buy With Confidence
Machinery Values is one of the world's largest machinery dealers, in business since 1971.All used items bought from our eBay store are covered by a standard MDNA (Machinery Dealer's National Association) 30 day return privilege, which means you can return an item you are dissatisfied with for a full refund. Please click on our MDNA return privilege link for complete details on how this works.New machines are covered under their own warrantees. Details of each warranty can be found within the quotation for all new machines.Most items in our store are located in our warehouse in Harrison, New Jersey - about 9 miles from New York City. You may inspect any item prior to purchase, under power in most cases, simply by calling and arranging an inspection. There is no charge for this.We are a Certified Square Trade Seller - click on the Square Trade logo for details. Questions? Email us at: ebay@machineryvalues.com
|
|
Back to home page
) 
Machinery Values
Print
Report item
