You are bidding on 136 " /244x244 cm/ manual autofixed wall screen 1:1 4:3 16:9 in Glass Bead Finish.
Model number: AWS-GB-136
RRP: $689
Ultimate solution for your home cinema. Brand new projection screen in Glass Bead finish /read below about glass bead/! Manufactured using latest technology and years of experience of making projector screens.
The unit can be hung on the wall or mounted inside your custom housing.
This screen can be used as 1:1, 4:3 or 16:9 depending on how much will you pull the screen down.

Why buy BrightVision?
Brightvision jointly has over 50 years experience manufacturing projector screens.
Check the manufacturers website and see why you should buy a Brightvision!

Click on the above picture.
Not all screens are created equal!
Buying is a 'no name' screen is no different to buying 'no frills' baked beans you know they're cheaper... but they're never as good!
Available screen sizes and types
Model | RRP | Diagonal | Size /lenght x height/ | Ratio | MW | GB |
RCS-MW-92 | $1199 | | | | | 16:9 | x | 
|
RCS-MW-106 | $1029 | | | | | 16:9 | x | 
|
RCS-GB-106 | $1299 | | | | | 16:9 | 
| x |
RCS-MW-72 | $629 | | | | | 4:3 | x | 
|
RCS-GB-72 | $789 | | | | | 4:3 | 
| x |
RCS-MW-84 | $899 | | | | | 4:3 | x | 
|
RCS-MW-100 | $1199 | | | | | 4:3 | x | 
|
RCS-MW-120 | $1299 | | | | | 4:3 | x | 
|
RCS-GB-120 | $1549 | | | | | 4:3 | 
| x |
TS-GB-99 | $649 | | | | | 1:1 | 
| x |
TS-MW-100 | $689 | | | | | 4:3 | x | 
|
AWS-GB-136 | $689 | | | | | 1:1 | 
| x |
AWS-MW-92 | $549 | | | | | 16:9 | x | 
|
AWS-MW-100 | $589 | | | | | 4:3 | x | 
|
PFS-MW-100 | $1299 | | | | | 4:3 | x | 
|

What is the difference between Matt and Glass Bead screens?
This has been reprinted from the Brightvision website: MW = Matt White
This has a typical GAIN of 0.9-1.0
Matt white vinyl reflective surface diffuses projected light in all directions, so image can be seen from any angle. MW provides accurate colour rendition as well as superior clarity. Recommended for use with all high light output projection devices. Requires control of ambient light in the audience area.
Best for:
Purists as you will get a perfect rendition of colours. If you have a DARK viewing room or a bright projector then this is for you!
Care and Maintenance: Clean surface with a solution of mild dishwashing liquid diluted with warm water. Sponge the surface, rinse with clear water and blot dry. Do not use cleaning solvents or abrasives.
GB = Glass Beaded
This has a typical GAIN 2.4
Spherical glass beads embedded in surface provide brighter on-axis viewing than matt white, within a narrower viewing cone. All glass beaded surfaces have some loss of clarity and perform best with smaller projectors.
GB screens will slightly alter the purity of the colours displayed... and will have 'sweet spots' where the picture is at its premium... the picture at other viewing angles can appear slightly darker (yet still lighter that a MW screen)
HOWEVER, The increased perceived brightness of the image is almost always worth the payoff. If you have natural light in your viewing room or if you have a lower brightness projector like LCD, then go for a GB screen.
Care and Maintenance: Clean surface with a very soft brush or cloth and carefully dust the surface. Do not use soap, water, solvents or abrasives.
Our recommendation:
GB screens are more 'practical' and give an excellent involving picture.