1HP/750W SWIMMING POOL, SPA & SOLAR WATER & FILTER PUMP

Professional 1.0HP/750W swimming pool pump
The Brand new Professional 750w swimming pool pump provides a 17,400 litres Per Hour (290 litres per minute) max flow rate. It is designed to provide maximum performance with corrosion resistance. This pump can cycle through a 70,000 litre pool in Approx. 4 hours, which suits your private and garden use.

This 750W Swimming Pool Pump is ideal for dependable continuous operation such as pool pumping. The Swimming Pool Pump is the heart of the pool system as it is a key component of the filtration process. This pump has been designed to work together with a filtering unit to make water circulate in pool.

One of the major considerations on choosing the right pool pump is to measure the size of your pool correctly. This will ensure that your pool runs at an optimum level, resulting in fewer problems, easier maintenance, lower energy costs and longer equipment life.

• Suitable for pools up to and including 70,000 litres
• Excellent Flow rate : Max flow rate of 17,400L/hr or 290L/ min
• Suitable for All Pools including Salt, Chlorine, In-ground and Above Ground
• Corrosion Resistant Marine Grade Cast Iron Motor Housing
• Chemical-resistant thermoplastic filter cartridge tank body
• Tough durable construction for longer lasting life
• Removable lint and hair trap/ filter with easy see-threw cover
• Built-In Thermal Protection
• Instruction manual for ease of use.
• Factory Wet Tested
  
• Brand new in Factory sealed box
• 40mm Australian Standard Unions Supplied
• Australian 3 Pin Power Plug

• Model: FCP750-S
• Rated Power: 1.0HP/750W
• Voltage/Frequency: 220~240V/50Hz
• Max. Pump Rate: 17,400L/hr or 290L/ min
• Max. Pressure Head: 17.5m (175Kpa)
  
• Max. Suction Head 8m
• Max. Grain/ Particle Size: 2.5mm
• Diameter of Inlet/ Outlet Pipe: 40mm
  
• Length of Cable: 1.2m
• Max. Temperature of water handled: 40 Degree Celsius
• Pump Size w/Unions: 550mm(L) x 240mm(W) x 350mm(H)
• Pump Weight: 10.5 Kg
• Gross Weight: 12.4kg
• CE, EMC, GS & TUV Approved

Materials:
Pump body, seal mounting, pump foot and diffuser in glass loaded polypropylene.
Impeller in glass loaded Noryl .
Motor shaft in Stainless Steel AISI-420.
Mechanical seal in graphite and alumine.
Motor housing in aluminium L-2521.
Windings impregnated with epoxy resin.
Motor:
Asynchronous, two poles.
IP 55 protection.
Class F insulation.
Continuous operation.
Built-in thermal protection.

"

This product comes with a 3 Month Warranty

Shipping