New-20W Single Output Industrial DIN Rail Power Supply
This compact & light weight industrial DIN rail switch mode power supplies,
Parts NO:MDR-20- 12V
Output Voltage: 12Volt DC (Adjustable±10%)
Ripple & Noise: 120mVp-p
Output Current: 1.67A
Efficiency: 80%
Dimensions: 22.5(W) x 90(H) x 100(D)mm
Features:
.Universal AC input / Full range
.Protections: Short circuit / Overload / Over voltage
.Cooling by free air convection
.Can be installed on DIN rail TS-35/7.5 or 15
.Built in DC OK active signal
.LED indicator for power on
.100% full load burn-in test
.No load power consumption < 0.75W
.3 years warranty.
We offer different kinds of Switchmode Power Supplies.
We’ll be expecting your enquiry.
Postage & Handling Cost Delivery Time Available to
AU$8.00 (By Air) 10 to 14 days Australia only
 |
Item arrived quickly and as described, would recommend. |
 |
good value, thanks very much |
|
Item was as advertised. Would recomend |
|
Items arrived exactly as described + in perfect condition. Thanks! A+A+A+A+A+++ |
|
Good product, well packaged. THANKS> |
|
thanks,well packed, arrived promptly |
|
Excellent quality and fast ship. HIGHLY RECOMMENDED |
MDR-20 series SPECIFICATION:
|
MODEL |
|
MDR-20-5 |
MDR-20-12 |
MDR-20-15 |
MDR-20-24 |
|
OUTPUT |
DC VOLTAE |
5V |
12V |
15V |
24V |
|
RATED CURRENT |
3A |
1.67A |
1.34A |
1A |
|
CURRENT RANGE |
0~3A |
0~1.67A |
0~1.34A |
0~1A |
|
RATED POWER |
15W |
20W |
20W |
24W |
|
RIPPLE & NOISE(max.) |
80mVp-p |
120mVp-p |
120mVp-p |
150mVp-p |
|
VOLTAGE ADJ.RANGE |
4.75~5.5V |
10.8~13.2V |
13.5~16.5V |
21.6~26.4V |
|
VOLTAGE TOLERANCE |
±2.0 % |
±1.0 % |
±1.0 % |
±1.0 % |
|
LINE REGULATION |
±1.0 % |
±1.0 % |
±1.0 % |
±1.0 % |
|
LOAD REGULATION |
±1.0 % |
±1.0 % |
±1.0 % |
±1.0 % |
|
SETUP,RISE TIME |
500ms,30ms/230VAC 1000ms,30ms/115VAC at full load |
|
HOLD UP TIME(Typ.) |
50ms/230VAC 20ms/115VAC at full load |
|
INPUT |
VOLTAGE RANGE |
85~264VAC 120~370VDC |
|
FREQUENCY RANGE |
47~63Hz |
|
EFFICIENCY(Typ.) |
76 % |
80 % |
81 % |
84 < |
|
AC CURRENTt(Typ.) |
0.55A/115VAC 0.35A/230VAC |
|
INRUSH CURRENT(Typ.) |
COLD START 20A/115VAC 40A/230VAC |
|
LEAKAGE CURRENT |
<1mA /240VAC |
|
PROTECTION |
OVERLOAD |
105~160? rated output power |
|
Protection type:Constant current limiting,recovers automatically after fault condition is removed |
|
OVER VOLTAGE |
5.75~6.75V |
13.8~16.2V |
17.25~20.25V |
27.6~32.4V |
|
Protection type: Shut down O/P voltage,re-power on to recover |
|
FUNCTION |
DC OK ACTOVE SIGNAL |
3.75~6V/50mA |
9~13.5V/40mA |
11.5~16.5V/40mA |
18~27V/20mA |
|
ENVIRONMENT |
WORKING TEMP. |
-20~+70?(Refer to output load derating curve) |
|
WORKING HUMIDITY |
20~90? RH non-condensing |
|
STORAGE TEMP.,HUMIDITY |
-40 ~ +85 , 10 ~ 95% RH |
|
TEMP.COEFFICIENT |
±0.03 ?? ( 0~50? ) |
|
VIBRATION |
Component:10~500Hz,2G 10min./1cycle,60min. each along X,Y,Z axes;Mounting:Compliance to IEC60068-2-6 |
|
SAFETY &
EMC
(Note 4) |
SAFETY STANDARDS |
UL508, TUV EN60950-1 Approved |
|
WITHSTAND VOLTAGE |
I/P~O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
|
ISOLATION RESISTANCE |
I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC |
|
EMI CONDUCTION&RADIATION |
Compliance to EN55011,EN55022(CISPR22),EN61204-3 Class B |
|
HARMONIC CURRENT |
Compliance to EN61000-3-2,-3 |
|
EMS IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-1,EN61204-3 Light industry level, criteria A |
|
OTHERS |
MTBF |
236.9k hrs min. MIL-HDBK-217F (25?) |
|
DIMENSION |
22.5*90*100mm(W*H*D) |
|
NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25? of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. |
|
Back to home page
) 
Claraworld
Print
Report item
