2HP SUBMERSIBLE WATER PUMP S-STEEL BORE WELL 200M HEAD - eBay Other Pumps, Pumps, Farming, Business, Industrial. (end time 11-Nov-09 16:28:03 AEDST)


This listing has ended. Item:2HP SUBMERSIBLE WATER PUMP S-STEEL BORE WELL 200M HEAD

Description

Postage and payments

Last updated on 18:13:14 AEDST, 07 Nov, 2009 View all revisions

Item specifics

Condition:

New

BRAND NEW

2HP / 1.5Kw STAINLESS STEEL BORE or WELL

WATER PUMP, with MASSIVE 200M HEAD

2HP WATER PUMP STAINLESS STEEL BORE, WELL 200M HEAD

CONTROL BOX INCLUDED

These series of multistage deep well submersible pumps have a motor with a rigid coupling and a shaft seal. The multistage pump is located at the top of the motor. A water lubricating guide bearing is adopted by the pump.

The pump shaft is connected to the motor shaft by coupling. The sand-proof valve is fitted in the discharge chamber to help prevent sand entering when the pump stops. The motor is equipped with a thermo protector for safe motor operation.

The preferred pumping medium is clean water with a temperature of below 40*C or other liquids with similar physical and chemical characteristics as water and non corrosive. Recommended PH value is between 6.8-8.

The contents of solids in water should be below 0.1% (quality proportion) and with a diameter smaller than 0.2mm.

The pump is widely used in areas with a low water level, and thus requiring a high head with a far distance to draw the water.

Specifications:

Motor power: 2HP / 1.5Kw

Delivery volume: 2000L(Hr)

Pressure height: 200mt

Size: Diameter 9.5cm - Length 110cm

Outlet: 1..25 inch

Rating: Continuous (3 wire)Single Phase 240v - 50Hz

7.8 Amps

Capacitor start

What is Included in the sale:

Pump: 2HP / 1.5Kw

Control Box

Insulation Tape

Instruction Manual

PLEASE NOTE; You will have to install a longer cable from the pump to the power box.
(CABLE NOT INCLUDED)

Meets Australian, New Zealand standards

& NEMA standards and is ISO9002 compliant

Comes with 12 Month Warranty.

This is an extraction of information from the Manufactures Web Site

Model:

4STM2-18

Introduction:

1.Identification Code:
4STM2-18
4:Well diameter:4"
ST: Submersible Pump Model
M: Single phase motor
2:Capacity(m3/h)
18:Stage

2.Fields of Application
For water supply from wells or reservoirs
For domestic use, for civil and industrial applications
For garden use and irrigation

3.Technical Date
Suitable fluids
Clear, free from solid or abrasive substances,
Chemically neutral and close to the characteristics of water
Performance
Speed range: 2900rpm
Fluid temperature range: -10*C to 40*C
Max. Working Pressure: 25bar

Ambient Temperature
Permissible up to 40*C
Power
Single phase: 1-240v/50Hz,60Hz
Motor:
Degree of protection: IP68
Insulation class: B
Construction Materials
Casing both of pump and motor, pump shaft: stainless steel AISI304
Outlet and inlet: bronze
Impeller and diffuser, non-return valve: thermoplastic resin PPO

4.Acessories
Control switch, waterproof tape.

Curve:

Table:

MODEL	POWER		Q=CAPACITY
SINGLE	KW	HP	M³/H	0	0.6	1.2	1.8	3.0	3.9
SINGLE	KW	HP	L/Min	0	10	20	30	50	65
4STM2-18	1.5	2.0	H(M)	200	183	170	152	104	52

SSO Postage Includes Packaging, Handling & Registration, We strongly recommend you take Insurance if required

AusPost

Postage and handling

Item location: Delahey, VIC, Australia

Posting to: Australia

Estimated delivery

Varies

Postal insurance

Not offered

Return policy

Return policy not specified.
Read item description for any reference to return policy.

Refunds by law: In Australia, consumers have a legal right to obtain a refund from a business for goods purchased (but not at auction) if the goods are faulty, not fit for purpose or don't match description. More information at returns.

Payment details

Payment method	Preferred/Accepted	Buyer protection on eBay
	Accepted
Bank Deposit	Accepted	Not Available