New ATTITUDE CARBIDE CUTTING TOOLS mfg in USA. This is a group of 2 pieces - 2mm diameter X 3mm(shank size) X 5mm(Flute length) X 38mm - ONE flute, solid carbide end mills. These tools are new and in their original containers. Tools are first quality and made from Micro Grain Carbide. These 2mm tools have 5mm of cutting length and are 38mm over all length and are on 3mm shanks.One Flute Tools WOW!! This uniquely designed one flute router bit is engineered for machining many materials such as aluminum, acrylic, plastic, wood, and MDF. The special end tooth configuration allows very aggressive drill-type penetration when a new hole or cut is to be started. The helical flute geometry gives a much smoother "cut" and surface finish while allowing a much higher chip evacuation when milling a groove. These tools are built with a high grade micro grained tungsten carbide with a transverse rupture strength in excess of 500,000 psi! This material and special end design gives superb strength and life to the corner and cutting edges. Use these tools and work with..... Attitude!  .