3D foamy rc plane c/w everything except rx/tx !!!!!!!!

Up for auction is this 3d foamy.

This is a fun little plane to fly, I built it myself from plans, it's made out of 6mm depron. The wing is double thickness with a balsa leading edge and a 6 mm carbon rod trough the middle. This is great firstly because the aileron servo wires are hidden, plus there is very little flex in the wing when under load, and there is an airfoil which gives it some lift. I'm selling it because I'm funding other plane projects.

Specs:

depron plane;  900mm wingspan, 750mm fuse

motor:  brushless Turnigy 2217 1050kv

ESC: Extreme RC 30amp 2-4 lipo

aileron servo's: Batan 1122 BB

elevator/rudder servos:  Waypoint W-150 MG  ( overkill I know..)

lipo:  flightmax 11.1v 800mah 20c 

buyer will need his/her own transmitter and receiver

pick up only from wandin nth (1hr east of melbourne)

Happy bidding and good luck!