 Back to home page | | |
|
|
|
) 
Reflective Workshop
Print
Report item
| |||
tWQCHU~$(KGrHgoH-DcEkJw1zHMKBKc,M5lUR!~~_11.JPG)
Want more!! Visit our ebay store Made in Quantity Width: 50mm (2 inches) Length: 10 metre (if you order more than 1 metres, the reflective tape will be provided to you on a continuous stripe). 1 metre = 1.094 yard We have more than 20 metres available.
Description 3M™ Diamond Grade™ Conspicuity Markings Series 983 are highly retroreflective microprismatic markings designed to mark the sides and rear of vehicles for enhanced visibility and detection. The reflective marking consists of prismatic lenses that are formed in a transparent, synthetic resin, sealed and backed with a pressuresensitive adhesive and clear poly liner. Applied to properly prepared surfaces Diamond Grade markings should provide seven years of field performance. • High brightness • Wide angularity to almost 90° from perpendicular Easy to apply • Aggressive pressure sensitive adhesive • Easy to remove liner • Available in convenient rolls, packaged pieces, or kiss-cut pieces on a roll Durable • Pre-sealed edges • Non-metallic construction to prevent corrosion • 7 year warranty (non-prorated) Maintenance CleaningRoutine washing is recommended for maximum performance. The following cleaning methods are recommended. • Wash with sponge, cloth or soft brush using water and detergent. • Automatic truck/car wash or standard high-pressure hand spray: Maximum pressure-1200 PSI/ 80 bar.Maximum water/wash solution temperature- 140°F/ 60°C.Minimum of 12 inches/ 30cm distance of cleaning jet(s) from markings.Cleaning wand or jets to be at no greater angle than 45 degrees from perpendicular to the marking surface.• When using metal brighteners, follow manufacturer’s recommendations for dilution. Thoroughly rinse from markings after soaking vehicle.
General Performance Considerations Series 983 markings will provide maximum durability when: • 3M recommended procedures are followed. • Marking is applied to vertical surfaces. Actual durability will be based on actual customer use, field testing, exterior exposed testing and artificial weathering testing. Durability can be reduced if recommended techniques are not followed: • Failure to cut markings around rivets, seams and body are panels. • Improper use of high pressure cleaning. • Spillage of chemicals or solvents. • Improper application or surface preparation.
|
Postage and handling Item location: Sydney, New South Wales, Australia Posting to: Australia
*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for postage service transit times. Transit times may vary, particularly during peak periods.
| ||||||||||||||||
Return policy
| ||
Payment details
Immediate payment required for this item Immediate payment of AU $118.00 is required. | ||||||
 About eBay | Announcements | Register | Security Centre | Feedback Forum | Site Map | Policies | Help | Contact Us | Advertise | |
Copyright © 1995-2009 eBay Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the eBay User Agreement and Privacy Policy.
| |