Track up to 10 items on this computer in 
)
D-Link DES-1008D is an unmanaged 10/100Mbps switch designed to enhance small workgroup performance while providing a high level of flexibility.
Powerful yet easy to use, this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths, boost response time and satisfy heavy load demands.
The switch comes with 8 10/100Mbps ports, allowing a small workgroup to flexibly connect to Ethernet and Fast Ethernet and integrate. These intelligent ports detect the network speed and auto-negotiate between 10Base-T and 100Base-TX, as well as between Half and Full-Duplex.
The flow control function minimizes dropped packets by sending out collision signals when the port's receiving buffer is full. The flow control is available in the half-duplex mode.
All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using usual straight-through twisted-pair cable.
With 8 plug-and-play ports, the switch is a perfect choice for the small workgroup to upgrade performance in a client/server environment. The ports can be connected to servers in full-duplex or to hubs in half-duplex.
With low-cost connection per-port, the switch can also be set up for direct connection from the PCs. This relieves data bottleneck by giving each workstation a dedicated bandwidth on the network.
Powerful yet easy to use, this device allows users to simply plug any port to either a 10Mbps or 100Mbps network to multiply bandwidths, boost response time and satisfy heavy load demands.
The switch comes with 8 10/100Mbps ports, allowing a small workgroup to flexibly connect to Ethernet and Fast Ethernet and integrate. These intelligent ports detect the network speed and auto-negotiate between 10Base-T and 100Base-TX, as well as between Half and Full-Duplex.
The flow control function minimizes dropped packets by sending out collision signals when the port's receiving buffer is full. The flow control is available in the half-duplex mode.
All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using usual straight-through twisted-pair cable.
With 8 plug-and-play ports, the switch is a perfect choice for the small workgroup to upgrade performance in a client/server environment. The ports can be connected to servers in full-duplex or to hubs in half-duplex.
With low-cost connection per-port, the switch can also be set up for direct connection from the PCs. This relieves data bottleneck by giving each workstation a dedicated bandwidth on the network.
| • | 8 10/100Mbps Auto-sensing on All Ports; Auto-MDII/MDIX on All Ports; All ports support half/full-duplex; Flow control for protection against data loss (half-duplex); Dynamic buffer allocation for each port; Auto-learning of network configuration; Secure store-and-forward switching scheme; Auto-correction of reverse twisted-pair polarity; Compact palm-sized |
| • | Technical Standards : IEEE 802.3 10Base-T Standard; IEEE 802.3u 100Base-TX Standard; ANSI/IEEE 802.3 NWay Auto-negotiation; IEEE 802.3x Flow Control; 100-ohm Category 3,4,5 (for 10Base-T) and Cat 5 (for 100Base-TX) Unshielded Twisted Pair cable; EIA/TIA-568 100-ohm Shielded Twisted Pair cable; Protocols : IEEE 802.3 Ethernet CSMA/CD; IEEE 802.3u Fast Ethernet CSMA/CD; IEEE 802.3x Flow Control; Certifications : FCC Class B CE Mark; VCCI Class B |
| • | System Features : Store-and-Forward Transmission Method; 2K MAC Address Filtering Table; 1Mbits RAM Buffer per Device; 1.6Gbps Backplane; External AC Power Adapter; Performance Features : 10Base-T Half-Duplex Filtering Rate = 14,880 pps per port; 100Base-TX Half-Duplex Filtering Rate = 148,800 pps per port; 10Base-T Half-Duplex Forwarding Rate = 14,880 pps per port; 100Base-TX Half-Duplex Forwarding Rate = 148,800 pps per port |
| • | Dimensions : 142 x 108 x 32 mm; Operating Temperature : 0°C to 50°C; Storage Temperature : -10°C to 70°C |
| • | Humidity : 10% to 90% non-condensing; Power Supply : DC 7.5V, 1A; Power Consumption : 2 watts (max) |
