4Ch RC EP Balsa Wood Built Scale J-3 Club Piper Model Number : rcpl81008 You are buying a Brand New 4Ch RC EP Balsa Wood Built Scale J-3 Club Piper ARF Kit. This model is based on the real J-3 Club Piper in scale but it is made of ultra light balsa wood and covered with fancy plastic film. The weight of the model is about 500g. It is absolutely easy to fly and control. If you did fly the real one or you dream to get one, it is the best choice for you!  Real J-3 Club Piper
Apart of the appreance, the interior design is also very nice for you to install the radio gear. The servo rods are pre-installed. You do not need to spend extra time on locating the rods in the fuselage. Installation can be done in half day! The engine mount of this model is tailor-made for Turborix 1000rpm/v 222w D2836 Brushless Motor (Not Included). It is very easY to install and can be mount at front or back. It is much easier than ever before! This model is capable to do various aerobatic flying! Rudder, Elevator, Aileron, Throttle are all controllable! What are you waiting for? Let's have a look the pictures and see the details below !!! Specification: | Fuselage Length : | 755mm | | Wingspan : | 1300mm | | Fly Weight : | 850 - 900g | | Weight : | ~500g | | Recommended Motor : | 380 motor or 1000rpm/v 222w D2836 Brushless Motor | | Propeller : | 10 X 5" | | Recommended ESC : | 25A for Brushed / 30A for Brushless | | Radio : | 4CH/4S | | Package Weight : | ~1421g |
|