|
|
60" Swg 160" cc Sharp 60160X Heavy Pattern ENGINE LATHE
 60" Swing 160" Centers Sharp 60160X Heavy Pattern ENGINE LATHE, 40 HP, Spdl Bores Up to 12.5"
Ref #: 136854 iammdna XNEWLA
NEW SHARP BIG SPINDLE BORE PRECISION LATHE
MODEL: 60160X - Heavier Pattern Model
FEATURES
- Swing 35" - 70", center distance 60" - 200", spindle bore 6", 9",
& 12.5" (see our other listings for the full range of sizes)
- 18 spindle speeds, optional variable speed with 4 step changes
- Electromagnetic spindle brake
- Machine bed and base made out of one piece casting
- 6 way lever control of feed and rapid traverse for carriage, cross
slide & compound
- 240 threads for inch, metric, module and diametral pitch by
direct selection
- Additional hardened and ground way for support of apron
- Tailstock has Hi-Low gear for quill feed, also equipped with
"tang" and built-in stopper to help in heavy drilling
CAPACITY
Swing over bed: 60"
Swing over crosslide: 47"
Swing over gap, width: 80", 24"
Distance between centers: 160"
Bed width: 32"
HEADSTOCK
Spindle taper/bore: A2-11 (6.02") is standard, or A2-15 (9.05")
and A2-20 (12.51") are optional at extra cost
Spindle Speeds (18): 6 - 750 RPM
Vari speed (optional): 18 - 1,000 RPM, 16 - 750 RPM, 12 - 400 RPM
CARRIAGE
Cross slide travel: 31.5"
Compound travel: 17.7"
Longitudinal feeds: 0.0018 - 0.1 inch per revolution
Cross feeds: 0.0009" - 0.05 inch per revolution
Long. rapid feeds: 80 inch per minute
Cross rapid feeds: 40 inch per minute
Threads: metric: 1-56(60), inch: 1/2-28(60), module: 0.25-14(60), DP: 2-112 (60)
Leadscrew pitch: 2 teeth per inch
TAILSTOCK
Quill travel: 7.87"
Quill diameter: 5.75"
Quill taper: MT #6
GENERAL
Main motor: 40 hp
Net weight (approximately): 63,400 lbs
STANDARD EQUIPMENT
Spindle sleeve, coolant system with pump & hose, halogen work
light, dead centers (2), chip guard on compound, indexable (8
positions) 4 way toolpost, toolbox & tools.
OPTIONAL EQUIPMENT (Call for prices)
4-Jaw chuck, face plate, steady rest, rear chuck adaptor, taper
attachment, variable spindle speeds (4 steps), semi-automatic
threading and turning cycle, & constant surface speed.
Machine Location: HARRISON, NJ
Click Here For More Sharp Machines
Click Here For More Toolroom Machines - NEW LATHES(s)
Questions about this Machine?
Call Kori at (800) 873-6224 ext 7555
Need a Freight rate?
Call Alex, our recommended trucking and shipping broker at (973) 732-3274
 |
Buy With Confidence
Machinery Values is one of the world's largest machinery dealers, in business since 1971.All used items bought from our eBay store are covered by a standard MDNA (Machinery Dealer's National Association) 30 day return privilege, which means you can return an item you are dissatisfied with for a full refund. Please click on our MDNA return privilege link for complete details on how this works.New machines are covered under their own warrantees. Details of each warranty can be found within the quotation for all new machines.Most items in our store are located in our warehouse in Harrison, New Jersey - about 9 miles from New York City. You may inspect any item prior to purchase, under power in most cases, simply by calling and arranging an inspection. There is no charge for this.We are a Certified Square Trade Seller - click on the Square Trade logo for details. Questions? Email us at: ebay@machineryvalues.com
|
|
Back to home page
) 
Machinery Values
Print
Report item
