60W Single Output 12V Industrial DIN Rail Power Supply - eBay Power Supplies, Test Equipment, Electrical, Business, Industrial. (end time 18-Dec-09 23:01:04 AEDST)


This listing has ended. The seller has relisted this item or one like this. Item:60W Single Output 12V Industrial DIN Rail Power Supply View relisted item

Last updated on 21:44:12 AEST, 22 May, 2008 View all revisions

New-60W Single Output Industrial DIN Rail Power Supply

This compact & light weight industrial DIN rail switch mode power supplies,

Parts NO:MDR-60- 12V

Output Voltage: 12Volt DC (Adjustable±10%)

Ripple & Noise: 120mVp-p

Output Current: 5A

Efficiency:       86%

Dimensions:      40(W) x 90(H) x 100(D)mm

Features:

.Universal AC input / Full range

.Protections: Short circuit / Overload / Over voltage

.Cooling by free air convection

.Can be installed on DIN rail TS-35/7.5 or 15

.Built in DC OK active signal

.LED indicator for power on

.100% full load burn-in test

.No load power consumption < 0.75W

.3 years warranty.

We offer different kinds of Switchmode Power Supplies.

We’ll be expecting your enquiry.

Postage & Handling Cost   Delivery Time    Available to

AU$11.00 (By Air)      7 to 14 days    Australia only

Got it ! thanks ! quality of the product is very poor but it is here ...

Excellent all round service, great product, highly recomend,A+A+A+A+A+A+

Brilliant Ebayer! Great Product and Super Fast Postage, Very Honest Seller A++++

Fast Delivery, Excellent Product, Recommend this Seller, ++++AAAA++++

very good ebayer--fast delivery

Good deal,well packaged,fast deliveryAAA+++

MDR-60 series SPECIFICATION:

MODEL

MDR-60-5

MDR-60-12

MDR-60-24

MDR-60-48

OUTPUT

DC VOLTAE

5V

12V

24V

48V

RATED CURRENT

10A

5A

2.5A

1.25A

CURRENT RANGE

0~10A

0~5A

0~2.5A

0~1.25A

RATED POWER

50W

60W

60W

60W

RIPPLE & NOISE(max.)

80mVp-p

120mVp-p

150mVp-p

200mVp-p

VOLTAGE ADJ.RANGE

5~6V

12~15V

24~30V

48~56V

VOLTAGE TOLERANCE

±2.0 %

±1.0 %

±1.0 %

±1.0 %

LINE REGULATION

±1.0 %

±1.0 %

±1.0 %

±1.0 %

LOAD REGULATION

±1.0 %

±1.0 %

±1.0 %

±1.0 %

SETUP,RISE TIME

500ms,30ms/230VAC 500ms,30ms/115VAC at full load

HOLD UP TIME(Typ.)

50ms/230VAC 20ms/115VAC at full load

INPUT

VOLTAGE RANGE

85~264VAC   120~370VDC

FREQUENCY RANGE

47~63Hz

EFFICIENCY(Typ.)

78 %

86 %

88 %

88 %

AC CURRENTt(Typ.)

1.8A/115VAC   1A/230VAC

INRUSH CURRENT(Typ.)

COLD START 30A/115VAC   60A/230VAC

LEAKAGE CURRENT

<1mA /240VAC

PROTECTION

OVERLOAD

105~150? rated output power

Protection type:Constant current limiting,recovers automatically after fault condition is removed

OVER VOLTAGE

6.25~7.25V

15.6~18V

31.2~36V

57.6~64.8V

Protection type: Shut down O/P voltage,re-power on to recover

FUNCTION

DC OK ACTOVE SIGNAL

Relay contact ration(max.):30V/1A resistive

ENVIRONMENT

WORKING TEMP.

-20~+70?(Refer to output load derating curve)

WORKING HUMIDITY

20~90? RH non-condensing

STORAGE TEMP.,HUMIDITY

-40 ~ +85? , 10 ~ 95% RH

TEMP.COEFFICIENT

±0.03 ?? ( 0~50? )

VIBRATION

Component:10~500Hz,2G 10min./1cycle,60min. each along X,Y,Z axes;Mounting:Compliance to IEC60068-2-6

SAFETY &

EMC

(Note 4)

SAFETY STANDARDS

UL508, TUV EN60950-1 Approved

WITHSTAND VOLTAGE

I/P~O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC

ISOLATION RESISTANCE

I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC 25? 70%RH

EMI CONDUCTION&RADIATION

Compliance to EN55011,EN55022(CISPR22),EN61204-3 Class B

HARMONIC CURRENT

Compliance to EN61000-3-2,-3

EMS IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-1,EN61204-3 Light industry level, criteria A

OTHERS

MTBF

299.2k hrs min. MIL-HDBK-217F (25?)

DIMENSION

40*90*100mm(W*H*D)

NOTE

1.       All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25? of ambient temperature.

2.       Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3.       Tolerance: includes set up tolerance, line regulation and load regulation.

4.       The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

5.       Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.

00417

Postage and handling

Item location: Taipei, Taiwan

Posting to: Australia, N. and S. America, Europe, New Zealand

Estimated delivery

Varies

Postal insurance

Not offered

Return policy

Return policy not specified.
Read item description for any reference to return policy.

Refunds by law: In Australia, consumers have a legal right to obtain a refund from a business for goods purchased (but not at auction) if the goods are faulty, not fit for purpose or don't match description. More information at returns.

Payment details

Payment method	Preferred/Accepted	Buyer protection on eBay
	Accepted