HI FOR SALE I HAVE AN AIRWRAP COT BUMPER THAT HAS BEEN USED BY MY DAUGHTER EXCELLENT FOR KEEPING LEGS AND DUMMY'S IN COT
THIS ONE HAS ONE LONG STRIP FOR AROUND THE COT AND A SHORTER PIECE FOR THE DROP SIDE
GRAB A BARGAIN
HAPPY BIDDING
AIRWRAP supersedes traditional cot bumpers with its breathable mesh
fabric allowing maximum airflow, while protecting baby from knocks and
tangling in the framework of the cot.
AIRWRAP’s thin collapsible fabric ensures it cannot be used as leverage to climb from the cot.
AIRWRAP fits most cots including larger brands like Boori. Use
AIRWRAP Original for cots with rails on 4 sides and use AIRWRAP - SPS
for cots with solid or fixed-ends.
AIRWRAP's padded breathable mesh is tested to world and local standards for breathability.
| AIRWRAP ™ |
Comparison Chart |
|---|
| No Bumper |
Standard Bumper |
AIRWRAP |
Lower risk of overheating |
YES |
X |
YES |
Breathable fabric |
— |
X |
YES |
No leverage for climbing |
YES |
X |
YES |
Restricts limbs from cot bars |
X |
YES |
YES |
Protects against bumps and knocks |
X |
YES |
YES |
AIRWRAP - Fitting Instructions
|
The
AIRWRAP is easy to fit safely. Attach the AIRWRAP following the
detailed instructions provided and adjust it to suit your cot type.
Please note AIRWRAP is currently suitable only for straight rail cots
without fixed ends. AIRWRAP is also not recommended for rounded cots.
 The AIRWRAP breathable mesh fabric has 2 sides. The soft mesh hole side faces the inside or child for both pieces.
Attach short piece to drop-side or cot front railing
- Place inside cot with Velcro facing the railing
- Wrap one end on the last (not corner) slat or rail
- Fasten top and bottom Velcro evenly
- Pull and do the same at the other end
- Ensure bumper is centered with each side having equal lengths of Velcro attached.
- Tighten by readjusting either end until you have desired fit
-
Fit should be just firm enough to still droop if your child was to
stand on it (i.e. not support them). More important once your child can
stand
- The bottom edge of the bumper should sit just under the level of the mattress
 
Attach long piece to remaining three sides
- Place inside cot with Velcro facing the railing
- Wrap one end on the last (not corner) slat or rail nearest the drop/front rail.
- Fasten top and bottom Velcro evenly
- Weave through corners using option A or B (most cots will suit option A)
- Pull and repeat steps 2 and 3 at the other end
- Ensure bumper is centered with each side having equal lengths of Velcro attached.
- Tighten by readjusting either end until you have desired fit
-
Fit should be just firm enough to still droop if a child was to stand
on it (i.e. not support them). More important once your child can stand
- The bottom edge of the bumper should sit just under the level of the mattress
 
NOTE: The final installation should appear as shown in this diagram.
 |
Track up to 10 items on this computer in 
)
)
