ALL BALLS WHEEL BEARING KT SUZUKI & HONDA 25-1160

ALL BALLS WHEEL BEARING KIT

Hands down, the most complete line of wheel bearing & seal kits!
All the bearings and seal required to refit a wheel in one convenient package.  Premium high-speed bearings feature low drag, double lip seals on both sides to provide superior exclusion of water and dirt and improved grease retention.  High performance Chevron SRI-II grease features special rust inhibitors for the most demanding applications. Type TC, Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt. The rubber coated outside diameter creates an optimum seal at the hub.

TEK TIP

REMOVING WHEEL BEARINGS:
When you knock a bearing out of a wheel, for chroming, powdercoating, etc., you are fundamentally destroying that bearing. In fact, there's no other way to get it out without destroying it because it's pressed in on the outer diameter but access to the bearing is from the inner diameter. So you're putting an impact force across the balls of the bearing, which damages it. It's called loading across the bearing races. You're putting little microscopic dents into the ball and the race, and over time they get aggravated. The technical term is brinneling; when you put a shock force on an outer race to an inner race across the balls, that's what you get.

Part # 25-1160

Check Below For Fitment

Rec Retail $26.95

Powered by eBay Turbo Lister