ANDATECH AL6000 PRO Breathalyser Breath Alcohol Tester

Why woud you buy Andatech AL6000 Pro ?

Andatech AL600 Pro is fully supported by Andatech and it is not a grey or parallel import product

Andatech AL6000 Pro has been tested and certified to Australian Standard AS3547 as a Type II hand held device. It is the first semiconductor breathalyser with Australian Standard tested and certified.

Andatech AL6000 Pro is accurate enough for police law enforcement use as well as cost effective for personal use.

Andatech AL6000 Prois the world first and only breathalyser that can be operated in dual-mode; it can be operated in a normal mode to measure specific blood alcohol concentration, or it can be used as an alcohol responder (share between multiple people) to test the presence of alcohol. AL-6000 Pro calibrating with high accuracy with ranges of 0.00 to 0.40%BAC.

A BASIC GUIDE TO GETTING A GOOD BREATHALYSER

• CERTIFICATION: Check whether the alcohol tester has been cleared by the recognised organisation e.g. SAI GLOBAL (Australian Standard), FDA (Food and Drug Administration), D.O.T. (Department of Transportation), NHTSA (National Highway Traffic Safety Administration).
• TECHNOLOGY: Mainly, there are four types of alcohol sensor technologies:
  • 1. Semiconductor Sensor Standard Models (also known as Hot Wire Model).
    the presence of standard semiconductor units has increased rapidly over the past few years. The main advantage with these types of units is that they are very cheap (from $10 to $99). Most of these units require no mouthpiece under normal use require recalibration every 6-12 months.
    Designed for: Personal use, Gifts, Promotional Items, Corporate Gifts.Note: Breathalysers that don't use mouthpieces are not as accurate as breathalysers that do. Cheaper or "blow hole" breathalysers offer low cost testing, with no mouth pieces to replace, but by not measuring pure deep lung breath they will never give as accurate results as sealed tube breathalysers. They remain suitable for non-critical consumer/self-testing.
    
  • 2. Semiconductor Sensor Professional Models.
    Professional-grade units meet strict requirements for approval and testing. These units have built-in air flow detection and are programmed to test deep-lung air samples. They have a long lifespan as long as they’re properly calibrated and maintained. Sensor replacement is a must after ever 400-500 uses.
    Designed for: Personal use, Drivers, Non-Evidential Workplace Testing, Medical professionals, Schools, parents.
  • 3. Fuel Cell Sensor Models.
    Fuel Cell units are considered to have one of the best sensors for an alcohol tester. They used by police officers, medical professionals, mining and transport industries. They are designed to have hundreds of test per day. Compared to the semi conductor sensor, the fuel cell unit can give more accurate readings to 3 decimal places reading e.g. 0.052 %BAC). The disadvantage is that they are expensive (normally 4 times the cost of a semiconductor sensor professional breathalyser). Sensor replacement is not required for fuel cell breathalysers
    Designed for: Law Enforcement, Drivers, Non-Evidential Workplace Testing, Medical professionals, Schools, Parents.
  • 4. Infrared (IR) Spectroscopy or Infrared Sensor Models.
    These units utilise the best sensor of all alcohol testers, and the best sensor of all alcohol testers, and are also known as evidential units. The price tag on Infrared Breathalysers is $50,000~$200,000. Infrared Bretahlyser is only operated by professional or fully trained person.
    Designed for: Enforcement, Evidential Testing, Medical professionals.
• CALIBRATION: All digital breathalysers require recalibration, how often depends on the sensor.
  Many buyers get confused by the term “calibration”, which is technical service, performed by manufacturers and dealers, to set up the accuracy of the breathalyser and ensure it gives a standardised reading at set concentrations of alcohol. At each recalibration service the breathalyser is reset to ensure accurate readings.
• SERVICE AND SUPPORT: Ensure the breathalyser company is an Australian Quality Endorsed Company with full contact details (not just a P.O. Box or registered mail drop). To ensure your breathalyser continues to perform properly, the breathalyser company must have the parts, tools, equipment and experience to maintain your breathalyser and conduct any repairs that may be required.

Product Quality : Australian Standard AS3547 CERTIFIED Registered CE Approval. Registered DOT Approval. FDA Approval. Product Made in Korea .