Adams Bluewater 290 Raised Saloon Yacht Boat Moulds.

Adams Bluewater 280/290 Raised Saloon Production Yacht Moulds.

20 Yachts Manufactured from these Yacht Moulds, with their condition suitable for many more to be produced.

Pictures are to show what the finished yacht looks like.

Live the Dream and make it a Reality.

These Production Fibreglass Yacht Moulds were Professionally Manufactured for many Thousands of Dollars, not to mention the time and effort spent to be Professionally Designed, and Engineered, and Produced.

These Production Moulds consist of ALL Fibreglass Production Moulds to Manufacture the Joe Adams Designed Bluewater 280/290 Raised Saloon Ocean Cruising Capable 280 Closed Transom, and the 290 Open Transom ( same Yacht, except the Open Transom extends the Yacht an extra 1 1/2 feet to take the overall length from 28' to just under 30' long ) Cruising Yachts.

Moulds included are:

Hull Mould with Closed Transom.

Extended Open Transom Mould.

Hull Keel Mould ( Integrated into the Hull - not bolted on ).

Rudder Moulds. 

Deck Mould.

All Exterior Locker / Anchor / Hatch / Cockpit Moulds.

Internal Furniture Floor Mould ( accomadates 5 Berths, Engine beds, Galley / Kitchen, Enclosed Head / Shower, Storage Access ).

Internal Raised Saloon Roof Mould.

Steel Axle Wheel / Hull Mould Moving Arm - to move Hull Mould around in workshop / yard.

All smaller misc. Moulds, Etc.

Also included are :

All Manufacturing Templates for the External and Internal Fitout.

Full Set of Structural and Fibreglass Lay-up Drawings, Plans, as well as Rigging Plan Details, Sail Plan Details.

Display Board with Enlarged Drawing of the Joe Adams Designed Bluewater 280/290 Raised Saloon Yacht.

The Steel 'Lead Keel Ballast' Mould.

2 x Steel Stands to Rotiserie Rotate the Hull Mould for ease of access when Gel Coating and Laying Up the Fibreglass Hull.

Note: All Hull / Deck / Interior Floor / Raised Saloon Roof Production Moulds, and the Steel Stands, are Manufactured to be movable with Castor Style Wheels.  

Basically, All the Production Fibreglass Moulds, Plans, Jigs, Templates, Drawings, and Details needed to Manufacture this Increadable Bluewater Cruising Yacht.

Yacht Dimensions / Specs are:    LOA ( 280 ):                     28' 6"             ( 8.68 meters ).

                                                       LOA ( 290 ):                        30' 0"             ( 9.14 meters ).

                                                       LWL ( 280 / 290 ):              26' 8"             ( 8.00 meters ).

                                                       Beam ( 280 / 290 ):              9' 1"               ( 2.77 meters ).

                                                       Draft ( 280 / 290 ):               4' 10.5"          ( 1.51 meters ).

                                                       Displacement ( 280 ):             8,296 Ibs        ( 8,766 Kgs ).

                                                       Ballast ( 280 / 290 ):               4,000 Ibs        ( 1,816 Kgs ).

                                                       Sail Area ( 280 / 290 ):       410 Sq Feet    ( 38 Sq meters ).

This Yacht was Designed by Joe Adams, with the intention for a Couple to be able to Sail this Yacht anywhere in the World, with all the imporntant details such as: Integrated Lead Keel, not Bolt-on Keel, Skeg Held Rudder, Large Fuel and Water Carrying Capacity, Well Protected Cockpit, Standing Room Height in the Raised Saloon, Foldable Dining Table, Half Size Chart Table, Ample Sized Freezer / Ice Chest, Large Cockpit Storage Under Cockpit Hatches, Extended Open Transom ( Boarding ) or Closed Transom Options, Integrated Strengthened Diesel Engine Beds ( Shaft or Saildrive Options ), not to mention the Safety Features a Joe Adams Designed Yacht has built into each Yacht, a true Bluewater Cruising Yacht.

Should you like to Start a Business, or Build your Own Yacht to Fullfill that lifelong Dream, to get further information, photos e-mailed, or view the finer details of this Opportunity, forward your Details, together with an E-mail Contact Address, and I will forward the Relevant Information.

The Production Moulds are Currently Stored in Ringwood, Melbourne, Victoria, and Glenburn, Victoria, with all Documentation and Plans in Croydon, Melbourne, Victoria.

The Successful Bidder will need to Pick-up the Goods from these locations, within Two weeks from the end of the Auction, unless otherwise Agreed.

Will consider all Reasonable Offers, and/or Part or Full Trade / Swap for Yacht, Car, or Real Estate.

Happy to assist with explaining the different Production Moulds, Plans, Etc. to the Successful Interested Person.

Can send further Info and Pictures to interested parties if you Forward me your E-mail Address.

Will be listing these Adams Moulds in full elsewhere, so if Researve is not met, will withdraw this item from this Auction if sold prior.

Happy Bidding.