AlcoLimit Enforcer 3 Breathalyser Tester - NEW

Product Overview

The AlcoLimit Enforcer 3 Breathalyser is designed for professional use, providing instantaneous %BAC results. It can detect the smallest amounts of alcohol up to 0.001%BAC. Data can be printed out with date, time and %BAC reading. The Enforcer 3 Breathalyser is an ideal breath alcohol screening device for use in the workplace by OH&S staff or by health professionals.  Designed for workplaces where a zero tolerance applies.

The Enforcer 3 Breathalyser is a dual mode device;

Fast mode is used for rapid testing of a large volume of people indicating "0" "Lo" or "Hi" reading and Normal mode is used for specific digital readout eg. 0.054%BAC.

Accessories include: carry pouch, 5 mouthpieces, instructions, wrist strap and batteries

The most affordable 3 decimal place Australian Standards approved breathalyser on the market today!


AlcoLimit's Flow Control Technology means that the sensor checks the flow rate of your breath and must receive an adequate air sample before it will provide you with a reading. This is just one of the safety measures built into the AlcoLimit range.

AlcoLimit's Intelli-sensor Recognition Technology checks the sensor condition every time you use your breathalyser. Stability of the sensor is analysed as well as the level of alcohol residue built-up on the sensor. An indication will be given if the sensor needs recalibration.

USE:

• mines, construction sites, factories, safety sensitive workplaces
• work social functions
• parties, BBQ's, after work drinks 
• Morning after heavy drinking
• P-Platers needing to be 0.000%BAC
• For bus & large transport drivers subject to mandatory testing at work
  
• whenever you have a drink and intend to drive
  

FEATURES:

• 3 decimal place LED (easy to read)
• Calibrated to the Australian Legal Limit
• Fast 3 second testing
• Dual mode testing
• Display options include Fast mode showing '0, Lo or Hi' or Normal mode showing your exact %BAC level
• Negative : 0.00 - 0.01%BAC (0).
• Caution : 0.02 - 0.04%BAC (Lo).
• Positive: 0.05 - 0.110%BAC (Hi).
• Data Storage : Connect to printer to print results instantaneously. Plus cumulative test counter on start-up.
• Warm-up time < 20 seconds.
• Breath Sampling Time 6 seconds (approx.) Gas flow sensor means a minimum flow must be received to get a reading.
• Time Between Retests < 20 seconds.
• Housing Shock Resistant Plastic.
• Weight 115g with batteries.
• Power Source 2 x 1.5V 'AA' batteries (included).
• Power usage over 200 times.
• Dimensions 137 x 73 x 44mm.
• Lifetime Uses 5000 tests.
• Recalibration: Professional use: 1-3 months / Personal use: 3-12 months.
• Manufacturer recalibration cost: $45 (includes parts).
• Detection range: 0.00 - 0.110%BAC
• Recalibration service
• Printer connectivity
• Protective carry pouch
• 5 mouthpieces supplied
• AA Batteries included
• 12 Month Replacement warranty
  

Please note: for accurate results, you must always wait 20 minutes from the time of your last alcoholic drink before testing.
Do not smoke for 10 minutes before using the Enforcer 3 breathalyser.
Have your Enforcer 3 recalibrated per instructions to maintain accuracy. For recalibration information contact the manufacturer directly.