The Aphex Model 108 is a two channel auto compressor incorporating the exclusive Easyrider technology for the best sounding, most transparent compression available. Unlike conventional compressors, the Easyrider thinks with you and for you, continuously monitoring the complexity of the program material and instantly adjusting the compression ratio and time constants accordingly. This unit really is a set and leave alone unit! Think of it more as having an extra set of hands while you play... Always getting the perfect settings without having to have intervention! You'll find the Model 108 easy to use, simple and quick to set up. It sounds completely transparent on individual voices, instruments and submixes as well as full program material.
 

 FEATURES
 Two Aphex Easyrider Compressor Channels in 1 rack unit   Dial in the amount of compression, up to 20 dB
 Wave Dependent Compressor™ (WDC) circuitry automatically adjusts time constants   Gain reduction meter with 10 LED steps
 No-Knee™ compression curve varios ratio automatically   Channels linkable for stereo operation
 Rotary Speed control controls the range of the WDC
release time   Switchable -10dBV / +4 dBu operation

Aphex's Easyrider Technology is combination of three exclusive Aphex circuits: the Wave Dependent Compressor, a patented circuit which automatically adjusts compressor time constants according to program complexity: our No-Knee compression curve circuitry which automatically adjusts compression ratio: and our own proprietary Aphex 1001 Class A VCA. This is the identical VCA that we use as the heart of the Aphex Compellor leveler/compressor and the Aphex Dominator peak limiter, well known by recording and mastering professionals.

One of the most annoying aspects of conventional compressors is the audible "pumping" or "breathing" side effects heard when the signal exceeds the compressor threshold and the compression "kicks-in". No-Knee compression curve means there is no abrupt transition to a high compression ratio. The Aphex Easyrider' delivers ultrasmooth compression, even under heavy gain reduction that makes most other compressors unlistenable. Under any condition, the Aphex Easyrider Model 108 sounds great and delivers studio quality performance.

AUDIO IF LEVEL SET TO +4 dBu IF LEVEL SET TO -10dBv (-7.8dBu)   Frequency Response 10Hz - 30 kHz (± 0.5dB) 3dB points = 3Hz and 54kHz same   Dynamic Range 94 dB same   Hum and Noise (unweighted 10Hz-22kHz) -72 dBu -83 dBu   Crosstalk (10 Hz - 22kHz at max. output) -80 dB same   THD with 10dB GR (fastest setting) .26% same   THD with 20dB GR (fastest setting) .5% same   THD with 10dB GR (slowest setting) .03% same   THD with 20dB GR (slowest setting) .05% same INPUT       Connector 1/4" TRS Phone Jack same   Type Transformerless, differential servo balanced same   Balanced 20k ohms 13k ohms   Unbalanced 6.5k ohms 6.5k ohms   Maximum Level +29 dBu +14 dBV (+16.2 dBu)   CMRR (typical) 52 dB same OUTPUT       Connector 1/4" TRS Phone Jacks same   Type Single-ended, impedance balanced (may be used unbalanced)     Balanced 120 ohms same   Unbalanced 56 ohms same   Maximum Level +22dBu +8dBV (+10.2dBu) OTHER SPECIFICATIONS   Power Requirements Unit is powered by an external 24-volt, 600mA transformer (supplied with unit). Primary voltage, connectorization and agency listings of transformers supplied with units are appropriate for local power at points of destination. 13 Watts.   Power Connector 2.5 mm "barrel" connector, located on rear panel   Dimensions 19"W x 1.75"H x 5.75" D   1 Rack U  (482.6mm x 44.5mm x 146mm)   Net Weight 3 lbs (1.36 kg)   External Transformer 14 oz   Shipping Weight 5 lbs (2.3 kg)