B6 V8 Lipo Battery Balance Charger 7.4v 11.1v 22.2v RC

Description:

• This is the new B6 V8 balance charger equipped with advanced microprocessor technology. This charger is pre-loaded with programs to charge Li-po, Li-ion, Li-Fe (A123), Ni-Cd, Ni-MH and Pb (Lead-Acid) batteries. The whole charger is intelligently controlled by the powerful microprocessor so that a much safer and faster charging process can be acheived. 5 JST-XH balancing sockets ranging from 2s to 6s are directly available on the charger body so that the charger looks neat. Accurate balancing can be done by connecting the balancing plug to the charger body sockets.

Spcifications:

• Operating voltage range: DC11.0-18.0 Volt
• Circuit power: Max. charge power 50W
• Charge current range: 0.1-5.0A
• Discharge current range: 0.1-1.0A
• Max. discharge power: 5W
• Current drain for balancing Li-po: 300mAh/cell
• NiCd/ NiMH battery cell count: 1-15cells
• L i-ion/ Polymer cell count: 1-6 in series
• Pb battery voltage: 2V-20V
• Weight: 9.6oz (270g)
• Dimensions: 5 1/4"x3 1/8"x1 3/16" (135 x 85.5 x 30mm) 

Feature:

• Optimized operating software

  This charger features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent to overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users.

   

  Internal independent Lithium battery balancer

  This employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.

   

  Balancing individual cells battery discharging

  During the process of discharging, B6 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.

   

  Adaptable to various type of lithium battery

  This charger adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.

   

  Fast and storage mode of lithium battery

  Purposes to charge Lithium battery variess, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.

   

  Maximum safety

  Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.

   

  Automatic charging current limit

  You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.

   

  Capacity limit

  The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.

   

  Temperature threshold

  The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.

   

  Processing time limit

  You can also limit the maximum process time to avoid any possible defect.

   

  Processing time limit

  You can also limit the maximum process time to avoid any possible defect.

   

  Input power monitoring

  To protect the car battery used as DC input power from being damaged, its voltage keeps being monitored. If it drops below the lower limit, the process will be ended automatically

   

  Data store / load

  The maximum five batteries's data can be stored for users' convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.

   

  Cyclic charging / discharging

  1 to 5 cyclic and continuous process of charge > discharge or discharge > charge is operable for battery refreshing and Balancing to stimulate the battery's activity.

   

  Support battery

   

  NiCd / NiMH

   Voltage level : 1.2V / cell

  Allowable fast charge current : 1C-2C (depends on the performance of cell)

  Discharge voltage cut off level : 0.85V / cell (NiCd), 1.0V / cell (NiMH)

   

  Li-ion

   Voltage level : 3.6V / cell

  Max. charge voltage : 4.1V / cell

  Allowable fast charge current : 1C or less

   

  LiPo

   Voltage level : 3.7V / cell

  Max. charge voltage : 4.2V / cell

  Allowable fast charge current : 1C or less

  Discharge voltage cut off level : 3.0V / cell or higher

   

  LiFe

   Voltage level : 3.3V / cell

  Max. charge voltage : 3.6V y/ cell

  Allowable fast charge current : 4C or less

  Discharge voltage cut off level : 2.0V / cell or higher

   

  Pb

   Voltage level : 2.0V / cell

  (Lead-acid) Max. charge voltage : 2.46V / cell

  Allowable fast charge current : 0.4C or less

  Discharge voltage cut off level : 1.75V / cell or higher

    Package include:

• 1 B6 V8 battery balance charger

• 1 Set Cables as the photo showing above

• 1 English manual