Build a digital single to 3-phase converter 4-8-12-16kW

Plans and tips to build digital single to three-phase converters 4kW to 24kW (5 to 30 hp).

Phase converters are used in metal or woodworking workshops, in meat processing, in bakeries, on dairy farms.
They run one or many three-phase machines on single phase power

Rotary converters all have some known drawbacks:

- The generated phase voltage varies with changing loads.
- Motors and machines cannot develop their full nameplate power.
- CNC machines, plasma cutters, VSDs disconnect from power unless a converter is heavily oversized.
- Motors start and accelerate sluggishly

Change this, build a digital single to three-phase converter with advanced features:

* Phase voltages are digitally balanced to within 3%. Motors develop their full nameplate power.
* Voltages remain stable at all loads. CNC, VFDs, welders work well without the need to oversize anything.
* No contacts, no electrolytic capacitors are used. This converter will last.
* Soft solid-state capacitor switching at zero crossings. Waveforms are perfectly sinusoidal.
* Motors and machines accelerate much faster than with any other converter.
* No harmonics, no EMC is produced. Power quality and emissions meet all standards.
* No restrictions: All loads are allowed (motors, electronics, heaters, transformers, rectifiers...)
* Same specifications as Booster converters in USA, Australia and Digi-Phase in the UK

Assemble the parts inside a ventilated box.
Your electrician will finish the wiring

Details:
Install a standard three-phase motor on soft mounts outside or inside a box.
Install standard metalized polypropylene capacitors.
Install the digital single to three-phase Booster controller

Parts, controllers, complete kits, support and even complete solutions are available in the US, UK, Australia, New Zealand.
Sources are published (google) and also listed in the supplied documents

Installing the components is easy.
Reading the wiring diagrams requires electrical knowledge

You will receive:
Wiring diagrams for nine different converters 4kW to 24kW (5 to 30HP).
With part specifications, building instructions, tips.
16 pages. No movies, no books, not the internal circuitry of the digital controllers.
Money back if not satisfied

Supply voltage of your new Booster converter will be single phase 240V

Three-phase output will be:
in US and Canada: 3x 240V 60Hz. in UK, Ireland, Australasia: 3x 415V 50Hz