CISCO 2801 128MB/64MB 2xFE+4xVIC/HWIC Router IOS 12.4

BYTRON-IT Solution

ITEM :  CISCO 2801 Modular Router, 128MB RAM/64Mb Flash RAM,  2xFast Ethernet port, 4xVIC/WIC/HWIC Slots , Power cord .

Manufactured by: - CISCO Systems

Model/Part Number: - Series 2801 .

Configuration Details CISCO 2801 Modular Router with 4 Slots . 128MB RAM/64Mb Flash RAM 2xFE Fast Ethernet/IEEE 802.3 interfaces. 4x VIC/WIC/HWIC Slots . IOS C2801 Version 12.4 Console and AUX interfaces  Rackmount ears+Power cord  included Operates at 100/240V 50/60Hz .

External Condition: - Good.Some marks back right side corner-no functional damages.

Warranty: - NOT DOA.

Other Comments/Details: The unit comes from a working environment(01). Boot system   System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 2004 by cisco Systems, Inc. PLD version 0x10 GIO ASIC version 0x127 c2801 processor with 131072 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled     Readonly ROMMON initialized program load complete, entry point: 0x8000f000, size: 0xc100   Initializing ATA monitor library....... program load complete, entry point: 0x8000f000, size: 0xc100   Initializing ATA monitor library.......   program load complete, entry point: 0x8000f000, size: 0xd49718 Self decompressing the image : ################################################# ################################################################################ ######## [OK]   Smart Init is enabled smart init is sizing iomem   ID            MEMORY_REQ         TYPE                 0X003AA110 public buffer pools                 0X00211000 public particle pools                 0X000021B8 Onboard USB   If any of the above Memory Requirements are "UNKNOWN", you may be using an unsupported configuration or there is a software problem and system operation may be compromised.   Allocating additional 7714372 bytes to IO Memory. PMem allocated: 117440512 bytes; IOMem allocated: 16777216 bytes                 Restricted Rights Legend   Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.              cisco Systems, Inc.            170 West Tasman Drive            San Jose, California 95134-1706   Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 12.4(1c), RELEASE SO FTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Wed 26-Oct-05 08:42 by evmiller Image text-base: 0x6007ECA0, data-base: 0x61480000   Port Statistics for unclassified packets is not turned on. Cisco 2801 (revision 6.0) with 114688K/16384K bytes of memory. Processor board ID FHK1032F1Z8 2 FastEthernet interfaces DRAM configuration is 64 bits wide with parity disabled. 191K bytes of NVRAM. 62720K bytes of ATA CompactFlash (Read/Write)              --- System Configuration Dialog ---   Would you like to enter the initial configuration dialog? [yes/no]: no     Press RETURN to get started!   Router>   Router>Show diag   Slot 0:         C2801 2FE 4SLOT Mainboard Port adapter, 2 ports         Port adapter is analyzed         Port adapter insertion time unknown         EEPROM contents at hardware discovery:         Chassis MAC Address      : 0019.0663.4734         MAC Address block size   : 34         PCB Serial Number        : FOC10295Z4M         Hardware Revision        : 6.0         Part Number              : 73-8190-06         Board Revision           : A0         Top Assy. Part Number    : 800-23435-03         Deviation Number         : 0         Fab Version              : 04         CLEI Code                : IPM7P00CRA         RMA Test History         : 00         RMA Number               : 0-0-0-0         RMA History              : 00         Product (FRU) Number     : CISCO2801         Version Identifier       : V02         Processor type           : 86         Chassis Serial Number    : FHK1032F1Z8         EEPROM format version 4         EEPROM contents (hex):           0x00: 04 FF C3 06 00 19 06 63 47 34 43 00 22 C1 8B 46           0x10: 4F 43 31 30 32 39 35 5A 34 4D 40 04 1C 41 06 00           0x20: 82 49 1F FE 06 42 41 30 C0 46 03 20 00 5B 8B 03           0x30: 88 00 00 00 00 02 04 C6 8A 49 50 4D 37 50 30 30           0x40: 43 52 41 03 00 81 00 00 00 00 04 00 CB 89 43 49           0x50: 53 43 4F 32 38 30 31 89 56 30 32 20 D9 02 C1 40           0x60: 09 86 C2 8B 46 48 4B 31 30 33 32 46 31 5A 38 FF           0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x100: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x110: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x140: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF           0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF   Router>   Router>Show ver   Cisco IOS Software, 2801 Software (C2801-IPBASE-M), Version 12.4(1c), RELEASE SO FTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2005 by Cisco Systems, Inc. Compiled Wed 26-Oct-05 08:42 by evmiller   ROM: System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)   Router uptime is 8 minutes System returned to ROM by power-on System image file is "flash:c2801-ipbase-mz.124-1c.bin"   Cisco 2801 (revision 6.0) with 114688K/16384K bytes of memory. Processor board ID FHK1032F1Z8 2 FastEthernet interfaces DRAM configuration is 64 bits wide with parity disabled. 191K bytes of NVRAM. 62720K bytes of ATA CompactFlash (Read/Write)   Configuration register is 0x2142   Router>

Payment Payment is to be made within 7 days since end of auction. Direct Deposit Into Our Account. Money Order. Internet Bank Deposit . Paypal for Internationals Buyers Cheques (14 Working Days to Clear). We not accept COD. Note: Please make sure to include your name/item if you do Direct Debit .

Shipping & Handling Buyer will pay handling and shipping unless is other specified. We Ship Domestic and International  TNT Courier Service. Australian Post Registered shipping. Buyer's own organized shipping-customer courier account must be provided.  Please ask for shipping quote Note: Please make sure to include your full Address and Contact phone Number for Delivery.

Terms of Sale Please do not bid, if you do not accept these conditions: Winning bidder to establish contact within 48 hours.   Please read carefully the item description. Ask if you have some lack of information related by item. We are not responsable if you buy an item which not suit with your purpose because you didn't read carefully the description .You can not return the item and refunding not apply in this case. Payment must be received within 7 days. There are no excuses, or do not place a bid. If no contact made within 48 hours and payment not received within 10 Days, the eBay rules for non-payer bidder will apply. Buyer to pay Shipping/Insurance/Registering/Packaging//Handling Fees. Unless it is specified as (Free Postage). Shipping by TNT Courier and Australian Post Service only. A Nominated Courier might be used if the buyer chose to organize its own freight(Receiver Courier account will be required in this case).   To avoid that the items to be lost in Transit we preffer send items by Registered Parcel Post (signature reqiured to receive package and Insured up to $ 100.00) or Express Post , but you should ask this. You may wish to organize your own freight, which is all right by us, the Freight Company requires a pickup Signature or We will not give them your Items Pick up is welcome  , just call us before to organize it. Orders are Shipped within 1 Business Day after receipt of Payment. We ship AUSTRALIA and INTERNATIONAL. All our Sales are GST Inclusive. Invoice will be send to all customer. No Responsibility is taken for goods sent without Insurance or by Regular Postage. No Responsibility if it is lost by Post, more Secure to Post it as Registered Post. Items described as "Tested and Working" or "New" have 14 Days Replacement Warranty on Hardware. Warranty starts from the date of Auction ends. Warranty is not available if the item is damaged by shippment ,by unprofessional item handling by buyer and when is described "AS-IS". All Returns must be approved by E-mail or phone and must be accompanied with a note-containing Item Buyer's Info and explanation for return. Returned items must be complete. We are not responsible for damage during return shippment, packaging must be good and insure it for your protection! Buyer is responsible for return shipping charges. Received defective piece, we will ship a replacement or issue a refund if duplicate is not in stock .Items found as been defective by unprofessional handling of buyer will not be refunded. Item testing will take up to 3 days and an expected decision of refunding will be take after. We cannot and will not refund shipping costs - they are paid to Australian Post not to us. Warranty does not cover consumables such as toner cartridges, ink, color ribbon, laptop battery. If the Description says: "AS-IS"- That means we do not have the expertise or resources to test it 100% and no Warranty is expressed or implied, - There are no returns on items that are "AS - IS"! All successful Transactions will have a Positive Feedback, after you leave Feedback for us First. NOTE: Please if you have any Question, E-Mail Us before you place a bid.

Contact Us on E-Mail: cesa@optusnet.com.au

 

Powered by eBay Turbo Lister