CISCO CATALYST 2950 WS-C2950T-48-SI Switch

BYTRON-IT Solution

ITEM :  CISCO Catalyst 2950 Gigabit WS-C2950T-48-SI 48x10/100Base-TX+2x10/100/1000Base-T ports switch . Standard Image IOS 12.1. Rackmount kit ,Power cable .

Manufactured by: - Cisco Systems

Model/Part Number: - WS-C2950T-48-SI

Configuration Details CISCO CATALYST C2950T-48-SI 1RU Gigabit switch . 48 FastEthernet/IEEE 802.3 interface(s) 10/100Base-TX -RJ45 2x10/100/1000Base-T RJ-45 FastEthernet/IEEE 802.3 interface(s) Runs IOS C2950 Ver. 12.1 . Power Cable +Rackmount brackets included. Operates at 100/240V 50/60Hz

External Condition: - Good

Warranty: - NOT DOA.+14Days

Other Comments/Details: Tested Ports and Console, comes from a working environment(01). System Boot start     C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(14)AZ, RELEASE SOFTWARE (fc2) Compiled Tue 14-Oct-03 17:14 by antonino WS-C2950T-48-SI starting... Base ethernet MAC Address: 00:0f:24:5c:af:c0 Xmodem file system is available. Initializing Flash... flashfs[0]: 80 files, 3 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 7741440 flashfs[0]: Bytes used: 5272576 flashfs[0]: Bytes available: 2468864 flashfs[0]: flashfs fsck took 6 seconds. ...done initializing flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 Loading "flash:/c2950-i6q4l2-mz.121-14.AZ.bin"...############################### ################################################################################ ################################################################################ ################################################################################ ###############################################   File "flash:/c2950-i6q4l2-mz.121-14.AZ.bin" uncompressed and installed, entry po int: 0x80010000 executing...                 Restricted Rights Legend   Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.              cisco Systems, Inc.            170 West Tasman Drive            San Jose, California 95134-1706   Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(14)AZ, RELEASE SOFTWARE (fc2) Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Tue 14-Oct-03 17:30 by antonino Image text-base: 0x80010000, data-base: 0x805C0000     Initializing flashfs... flashfs[1]: 80 files, 3 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 7741440 flashfs[1]: Bytes used: 5272576 flashfs[1]: Bytes available: 2468864 flashfs[1]: flashfs fsck took 6 seconds. flashfs[1]: Initialization complete. Done initializing flashfs. POST: System Board Test : Passed POST: Ethernet Controller Test : Passed ASIC Initialization Passed   POST: FRONT-END LOOPBACK TEST : Passed cisco WS-C2950T-48-SI (RC32300) processor (revision C0) with 20710K bytes of mem ory. Processor board ID FHK0806Z09M Last reset from system-reset Running Standard Image 48 FastEthernet/IEEE 802.3 interface(s) 2 Gigabit Ethernet/IEEE 802.3 interface(s)   32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:0F:24:5C:AF:C0 Motherboard assembly number: 73-9102-03 Power supply part number: 34-0965-01 Motherboard serial number: FOC08050NQF Power supply serial number: DAB0751HTMA Model revision number: C0 Motherboard revision number: A0 Model number: WS-C2950T-48-SI System serial number: FHK0806Z09M CLEI Code Number: CNMRU002RA Top Assembly Part Number: 800-24111-01 Top Assembly Revision Number: C0 Version ID: N/A     Press RETURN to get started!   BenSubSwitch02>   BenSubSwitch02>Show ver   Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(14)AZ, RELEASE SOFTWARE (fc2) Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Tue 14-Oct-03 17:30 by antonino Image text-base: 0x80010000, data-base: 0x805C0000   ROM: Bootstrap program is C2950 boot loader   BenSubSwitch02 uptime is 10 minutes System returned to ROM by power-on System image file is "flash:/c2950-i6q4l2-mz.121-14.AZ.bin"   cisco WS-C2950T-48-SI (RC32300) processor (revision C0) with 20710K bytes of memory. Processor board ID FHK0806Z09M Last reset from system-reset Running Standard Image 48 FastEthernet/IEEE 802.3 interface(s) 2 Gigabit Ethernet/IEEE 802.3 interface(s)   32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:0F:24:5C:AF:C0 Motherboard assembly number: 73-9102-03 Power supply part number: 34-0965-01 Motherboard serial number: FOC08050NQF Power supply serial number: DAB0751HTMA Model revision number: C0 Motherboard revision number: A0 Model number: WS-C2950T-48-SI System serial number: FHK0806Z09M CLEI Code Number: CNMRU002RA Top Assembly Part Number: 800-24111-01 Top Assembly Revision Number: C0 Version ID: N/A Configuration register is 0xF   BenSubSwitch02>

Payment Payment is to be made within 7 days since end of auction. Direct Deposit Into Our Account. Money Order. Internet Bank Deposit . Paypal or Wire Transfer for International Buyers Cheques (14 Working Days to Clear). We not accept COD. Note: Please make sure to include your name/item if you do Direct Debit .

Shipping & Handling Buyer will pay handling and shipping unless is other specified. We Ship Domestic and International  TNT Courier Service. Australian Post Registered shipping. Buyer's own organized shipping-customer courier account must be provided.  Please ask for shipping quote Note: Please make sure to include your full Address and Contact phone Number for Delivery.

Terms of Sale Please do not bid, if you do not accept these conditions: Winning bidder to establish contact within 48 hours.   Please read carefully the item description. Ask if you have some lack of information related by item. We are not responsable if you buy an item which not suit with your purpose because you didn't read carefully the description .You can not return the item and refunding not apply in this case. Payment must be received within 7 days. There are no excuses, or do not place a bid. If no contact made within 48 hours and payment not received within 10 Days, the eBay rules for non-payer bidder will apply. Buyer to pay Shipping/Insurance/Registering/Packaging//Handling Fees. Unless it is specified as (Free Postage). Shipping by TNT Courier and Australian Post Service only. A Nominated Courier might be used if the buyer chose to organize its own freight(Receiver Courier account will be required in this case).   To avoid that the items to be lost in Transit we preffer send items by Registered Parcel Post (signature reqiured to receive package and Insured up to $ 100.00) or Express Post , but you should ask this. You may wish to organize your own freight, which is all right by us, the Freight Company requires a pickup Signature or We will not give them your Items Pick up is welcome  , just call us before to organize it. Orders are Shipped within 1 Business Day after receipt of Payment. We ship AUSTRALIA and INTERNATIONAL. All our Sales are GST Inclusive. Invoice will be send to all customer. No Responsibility is taken for goods sent without Insurance or by Regular Postage. No Responsibility if it is lost by Post, more Secure to Post it as Registered Post. Items described as "Tested and Working" or "New" have 14 Days Replacement Warranty on Hardware. Warranty starts from the date of Auction ends. Warranty is not available if the item is damaged by shippment ,by unprofessional item handling by buyer and when is described "AS-IS". All Returns must be approved by E-mail or phone and must be accompanied with a note-containing Item Buyer's Info and explanation for return. Returned items must be complete. We are not responsible for damage during return shippment, packaging must be good and insure it for your protection! Buyer is responsible for return shipping charges. Received defective piece, we will ship a replacement or issue a refund if duplicate is not in stock .Items found as been defective by unprofessional handling of buyer will not be refunded. Item testing will take up to 3 days and an expected decision of refunding will be take after. We cannot and will not refund shipping costs - they are paid to Australian Post not to us. Warranty does not cover consumables such as toner cartridges, ink, color ribbon, laptop battery. If the Description says: "AS-IS"- That means we do not have the expertise or resources to test it 100% and no Warranty is expressed or implied, - There are no returns on items that are "AS - IS"! All successful Transactions will have a Positive Feedback, after you leave Feedback for us First. NOTE: Please if you have any Question, E-Mail Us before you place a bid.

Contact Us on E-Mail: cesa@optusnet.com.au