Cisco 1841 Router 64MB CF Card + Serial WIC + BRI WIC

Working 1841 pulled from a working site. 

See details from the cisco website

http://www.cisco.com/en/US/products/ps5875/index.html


sh ver:

 Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.3(8)YG4, RELEASE
SOFTWARE (fc1)
Synched to technology version 12.3(10.3)T2
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 04-May-06 00:15 by ealyon

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
ROM: Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.3(8)YG4, REL
EASE SOFTWARE (fc1)

Router uptime is 4 minutes
System returned to ROM by power-on
System image file is "flash:c1841-ipbase-mz.123-8.YG4.bin"

Cisco 1841 (revision 7.0) with 116736K/14336K bytes of memory.
Processor board ID FHK1131F478
2 FastEthernet interfaces
1 Serial(sync/async) interface
1 ISDN Basic Rate interface
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)


sh run:

Current configuration : 714 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no aaa new-model
ip subnet-zero
ip cef
!
!
!
no ftp-server write-enable
!
!
!
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface BRI0/0/0
 no ip address
 shutdown
!
interface Serial0/1/0
 no ip address
 shutdown
 clockrate 2000000
!
ip classless
!
no ip http server
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0 4
 login
!
end