EV14 90LB BOSCH FUEL INJECTORS FG XR6T LS1-9 3/4 LENGTH

PRICE IS PER INJECTOR!!! ADAPTORS TO MAKE THESE REPLACE A STANDARD EV6/EV1 STYLE INJECTOR IS AN EXTRA $15 PER INJECTOR!!!

Product Information

90LB AT 43.5 PSI THESE FLOW 103LB/HR IN AN LS RAIL RUNNING 58 PSI FUEL PRESSURE.

EV14.HIGH IMPEDANCE. THESE ARE AVAILABLE TO FIT A VARIETY OF ENGINES, INCLUDING THE NEW XR6 TURBOS
THESE HAVE THE USCAR PLUG BUT ADAPTERS ARE AVAILABLE TO FIT ALL WIRE HARNESSES. WE ALSO HAVE THE ADAPTERS TO MOUNT THESE IN PLACE OF 60MM O RING TO O RING LENGTHS.
REVIEWS HAVE MADE THE EV14 IS THE BEST INJECTOR THAT BOSCH HAS EVER PRODUCED.
WE CUSTOM SIZE THESE, SO ALL SETS  ARE 100% FLOW MATCHED.

LS series Flow Matched

For LS1-LS9

At 3 bar the max flow is 90lbs at rail pressure the max is 103lbs

This is the largest LS1 high impedence injector available!!

LS1 to 9 Drop in High Impedance

•The lS2-9 can use this injector without adapters or wire connector modification

•On certain apps they will require a spacer between the rail and mount.

•Available in sizes from 52lb to 90lb at 3 bar (43.5psi)

•Voltage offsets are supplied with sizes from 65-91lbs

•Easy tuning as it is the same coil as the stock injector!

Height Adapters

Product Information

these are machined billet adapters that go over the top of the shorter new style injector to allow then to fit in appllications that use a standard 60 mm injector. There are 1000's of applications that these can be used for

 

Product Information

USE THIS HARNESS TO PUT LATE MODEL INJECTORS IN YOUR OLDER ENGINE THAT HAVE INJECTOR COVERS AND CANNOT USE THE WIRELESS  ADAPTERS.    ALSO USE THIS FOR ANY CAR

MADE OF HIGH QUALITY PARTS.  100% WATERPROOF

 

PLEASE NOTE: WE ORDER THIS INJECTOR AS THEY SELL SO THERE IS A 1 WEEK DELAY FOR HANDLING TIME FROM WHEN YOU ORDER TO WHEN WE SHIP!!!