Fibreglass Repair Kit - JUMBO Size 500gm

JUMBO Fibreglass Repair Kits - contain twice the amount of other kits! Kit contains BIG 500gm GP Resin (Waxed), 1/2 square mt CSM (450gm), MEKP Hardener, 2 stirrers, 1 pair latex gloves, disposable brush.

BONUS: Now includes Compression Roller FREE!

Everything you need to repair boats, canoes, cars, trucks, caravans, surfboards, surf ski's, water tanks, leaky gutters, down pipes and houshold jobs. All in one kit!

New JUMBO size Fibreglass Repair Kit is the ideal size for those larger repairs. Kit comes packaged in a rugged plastic screw top container, making it ideal for storage in 'out of the way' places on boats, in car boots etc. Container doubles as mixing vessel so everything that is needed is contained in one package.

Directions for use: Repair in 3 easy steps.

Step 1. Clean surface of rust, dirt and loose matter

Step 2. Cut fibreglass to desired shape.

Step 3. Mix Resin with Catalyst MEKP in empty contents container and apply to Fibreglass Mat using brush provided. Roll wet Mat with compression roller.

Hints: Wear rubber or plastic gloves when handling fibreglass. Do not prepare the mixture until required as only a limited time is available before the product gels. Clean up product with Acetone before it cures. At higher temperatures, the working time decreases. In large amounts heat can be generated during cure. Care should be taken on heat sensitive surfaces with large amounts. Use recommended levels of hardener and resin; variation may result in incomplete cure and variations in cure time.

Safety tips: Avoid contact with skin and eyes and avoid breathing resin vapours. If poisoning occurs, contact a Doctor or Poisons Information Centre. Phone Australia 13 11 26. If resin is swallowed, do NOT induce vomiting. Give a glass of water and seek medical advice. If skin contact with resin or hardener occurs, remove contaminated clothing and wash skin thoroughly. If irritation occurs seek medical advice. If in eyes, hold eyelids open and flush with water for at least 10-15 minutes. Obtain medical attention.

Our preferred method of payment is PayPal, but goods and freight can also be paid for by direct deposit into my account. ANZ - Belmont, NSW BSB - 012532 Account - 494008546 If in doubt about anything? then simply email our office - compositesupplies@gmail.com and our staff will respond to your request.

Due to the nature of our goods we cannot deliver to a PO Box, so a fixed address will be needed. We also recommend that you add a contact phone number as a note in the checkout, so the courier can contact you if needed.