Flycam6000 Steadycam for JVC GY-HD100 XL2 RED ARRI Cam

Flycam 6000

Camera Stabilization System

Most hand-held shots suffer from a distinct jerkiness. Undesired shocks of walking consist of two elements:

• quick movement of the entire camera by a small amount, and
• rotation of the camera itself (tilt, pan, and roll).

Successful isolation will significantly reduce the size of both types of movement.

Our steadicam features:-

• Universal Camera base plate
• Adjustable Gimbal
• Aluminium Bracket Mounts(For Weights & Mointer)
• Weights for balancing your camera.

Gimbal specifications:-

1. Wheelbarrow bearing provides Rotational control over camera so the camera can be easily rotated on its axis.

2. Grip swivels left and right from the bolt.

3. Angle bracket enables grip to move up and down.

The camera is mounted on one end of the 'Post', and the battery and monitor (and whatever special electronics the operator has added) are mounted to the other end. Now,the weight of the camera and the battery and monitor can be balanced to keep them at a greater distance from the 'gimbal'.

The added distance (and weight) means that the camera moves much faster when rotated at the gimbal -- just like the outer edge of a record moves much faster than the inner edge at the spindle. Since the camera moves faster at the end of the post than it would if mounted at the gimbal, it takes more effort to rotate the camera. (This is why high-wire walkers use a very long pole to help them balance -- instead of increasing weight, they increase length, so the pole increases stability much more than just sticking their arms straight out to their sides)

Universal camera base plate with quick release clamp

The Camera Base plate has both 1/4" and 3/8" mounting slots (holes) to accommodate all variety of camera bases. You can slide your camera with base plate of steadicam on both the horizontal and vertical axes, achieved by means of thumbscrews and a movable camera base plate. Picture is showing x-axis movement.

The Camera Base plate has both 1/4" and 3/8" mounting screws to accommodate all variety of camera bases.

This helps in setting the camera even more easily. The quick release system uses a lever operated clamp.

To mount the camera, you press the lever to lock open a cam-like lock. Now mount the camera to the plate with the help of screws provided. You then slide the plate into the clamp's front flanges and press it down in back to push down a pin that closes the cam to lock the plate into position.

You can slide a plate in only one end of the clamp and out the same (unidirectional). You can slide a long plate back and forth in the channel to adjust the camera-subject distance.

Gross balancing and composition adjustments can be achieved by sliding the plate within the jaws of the clamp with a movement range of up to 24mm.

Fine adjustment is made with the lead screw; lead screw delivers 1.25mm of travel per full revolution.

Aluminium Bracket Mounts

You can hold LCD Monitor at one side of the Flycam Pro 6000.
The idea of holding screen at another side of post is that the eye does not touch the camera in order to transfer shock to video. Therefore, the searcher picture is transferred by means of a internal wiring (wiring is done from inside the post). There are slots in post for this very purpose) to the monitor so that person operating this system can walk or run without giving any shock to this system.

The monitor and battery mount is stronger easier to flip for low mode and has a wider range of positions, both vertically and horizontally.

RETURN POLICY

• We will provide you replacement if there will be any manufacturing or functionality problem in our product. We don't provide refund for any reason.
• Don't send the unit to us wihout informing us. Don't leave negative feedback / paypal dispute without communicating with us. We will try our best to solve your every problem till your satisfaction regarding our product.

FEEDBACK AND ORDER PROCESS

If  you have any problems with your item once it is received, please contact me and give me a chance to fix the problem. 
Please do not leave negative feedback without working things out first, it is  inconsiderate and a bad ebay practice.

Before leaving feedback please email us so we can resolve any issues. Our reputation and feedback are the highest priority. Positive feedback is how we make our lively hood.

Once payment is received, your order will be processed. Expect your item within 4 to 10 business days (we ship Monday through Saturday). We ship Fast! Happy Shopping!