Gitzo GT2941 Mountaineer Basalt Fiber Tripod - NEW

Gitzo GT2941 Specifications Symbol Max Height Center Column Extended 168 cm Max Height Center Column Down 136 cm Weight 1.7 kg Minimum Height 29 cm Folded Length 56 cm Max Load 10.0 kg Column Type Rapid Leg Sections 4

Basalt Fiber:

Using the experience gained working with other advanced composite materials has made Gitzo the first and only manufacturer of a new generation of tripods that use Basalt fiber tubes. The fiber is made from basalt rock which is crushed and melted at 1500°C (or 2735°F). The extracted fibers are transformed into a tube using the same technology used for Gitzo Carbon 6X tube. Basalt tube has most of the features of carbon fiber, like high thermal and dimensional stability and reduced weight (20% lighter than aluminum). Like 6X, it is engineered to match Gitzos performance standards. Our Basalt tubes have a 1.2mm thick wall and a 3-crossed layer structure with built in Anti Leg Rotation (ALR). The performance and price of Basalt tripods puts them between aluminum and high performance Carbon 6X.

Usage:

Recommended for lightweight camcorders, spotting scopes and DSLRs with 200mm lenses, up to a 300mm maximum. Excellent maximum load capacity and good torsional rigidity, available in 3- and 4-section models at standard and eye level heights. Series 2 is the ideal solution for photographers that are looking for a solid tripod without sacrificing weight.

Features:

Features inherited from the Mountaineer tripods include GLock - our leg locking system that increases system rigidity by 20% and allows quicker and stronger leg locking - and the new Ground Level Set feature that allows the upper disc to be fitted directly to the top casting, removing the center column for ground level photography or to save weight. Basalt tripods come with a convenient anti-dust bag for storage and packing.

Features ALR Anti-Leg-Rotation: Gitzo have introduced a new Anti-Leg-Rotation system, which means the tripod can be opened in less than 15 seconds. Simply loosen all the twist locks on each leg at the same time, then pull the leg down and tighten the twists individually. LEG ENDS - All tripods and monopods in Series 1 and above are provided with removable rubber feet. This feature allows you to easily change worn out rubber feet or to fit other accessories, such as spiked feet or snow/sand shoes. (4 sections tripods in Series 1 are excluded because the final leg section is too narrow to fit these ends). G-LOCK - G-Lock is the new Gitzo leg locking system. The locking mechanism has been completely redesigned in order to achieve a 20% increase in rigidity, faster operation and stronger, safer locking. G-Lock’s special design also provides a “gravity lock� effect: the higher the load applied vertically to the leg, the stronger the lock. GROUND LEVEL SET - This new feature allows you to remove the center column to save weight and get the camera closer to the ground. Uses existing components: the upper disc with reversible 1/4 - 3/8 bolt and the column hook assembly: Remove column and fix the disk directly to the upper casting using the column hook. No tools needed. HOOK - This built-in accessory allows you to hang a stabilizingweight (e.g. a full camera bag or a sand/water bag) fromthe bottom of the tripod center column. Useful with longheavy lenses, on uneven ground or in windy conditions. RAPID COLUMN - The center column locking collar above the tripod shoulder makes it easier to adjust the column quickly. Series 1 and above are built with an anti-rotation grooved center column for improved stability. REVERSIBLE COLUMN - The rapid column can easily be inverted for an alternative shooting angle or low level macro work.