HAKL-Instant Hot Water heater electrical- MK2-7 KW new

Electric Water  heater HAKL MK2- 7 kW

Electric, electronically controlled instant water heater intended for connection to a water supply system for multiple consumption points.

HAKL MK-2 is intended for connection to a water supply system for single or multiple consumption points for utility riser shafts, cottages or small social facilities.

 

 

– Possibility to connect the heater to a water supply system for multiple consumption
   points;
– Heater is connected to two phases, at 7 / 9 / 11 kW, it divides the electric load
   between two phases;
– High-efficiency heating of hot water even in large-volume flows;
– Electronic safety cut-out against the burning of the heating element by the penetration    of an air bubble to the water supply system (e.g., when the water supply is stopped);
– Alarm light for a voltage drop in the electric network; flashing signals a drop in voltage,
   as well as incorrect functioning of the heater;
– Thermal overload protection shuts down the heating element if the temperature of the    inlet water increases, in order to prevent subsequent boiling of the water and damage
   of the heating element;
– Level of protection IP45 ensures safe operation in a wet environment, meaning,
   according to the STN standard, that the heater may be installed directly in a shower box
   or in an open area (pergola, summer terrace...);
– Minimum water pressure on operation is set from 0.05 Mpa (0.5 bar), also allowing
   installation of the heater by connecting it to a variable pressure water treatment device.

Quality HAKL water heaters are of top quality and made from top quality components:
	– SIEMENS switching technology (Germany) – HONEYWELL heat safety sensor (USA) – KANTHAL heater element (Sweden) – STEATIT ceramic package (Czech Republic) – GENERAL PLASTICS material for the production of plastics    (Netherlands) – CRISTINA components for water taps (Italy)