HP+ PERFORMANCE CHIP FOR HOLDEN CALIBRA CAPTIVA CG

Simple Explanation of How the Dyno Power chip works Back in the good old days before the EFI engine all the engines out there were Carbie fed. With the carbie fed engines one of the best and easiest ways to extract the potential horsepower from these engines is very simple and has been done by car enthusiast for many years. The two things needed to produce more power is bigger ignition spark and more fuel. By adjusting the distributer and changing the Carbie jets you could get huge gains in Horse Power even from a stock standard engine. This is called tuning your motor. Please note: If you have little or no mechanical knowlege you will need a copy of your vehicles wiring diagram to install this chip quickly and easily.

EFI engines today are severely restricted by the manufacture because of state and country demands. They do not give you the option on tunning your vehicle anymore. They are set to a certain limit and that is that.
Not anymore.

Pre set with a map of your make and models specifications The Dyno Power Performance chip is electronic tunning device that when connected to your engines ECU will allow you to tune and unlock your vehicles full performance potential. Whether standard naturally aspirated engines on Pump Fuel, LPG or diesel this chip can increase your overall peak Horse Power up to 15% In some cases this increase can be even greater up to 20-30%. This will give you more torque when accelerating a higher top speed as well as better throttle response throughout the rev range. It will smooth out flat spots and increase economy on longer trips. With the Dyno-Power performance chip whether you are using it for street, strip or off road you can be assured that your engine is giving you 100% of its capabilities at all times.
The Dyno-Power Performance chip comes with easy universal step by step fitting instructions and will also explain how to get the best possible tune from your engine..
The Dyno-power chip has very little or no learning time, it can be fitted to a toggle switch and turned Off/On while driving. This will allow you go back to the standard settings at anytime and is a great idea if other people such as nanna drive your car.
(We do not sell the switch as it is cheaper to buy directly from you local automotive store)
We manufacture a large range of Dyno-Power performance chips for many makes and models of Cars, Bikes, Boats ATVs and Snowmobiles. Each chip is specifically designed and tuned for the make and model that is advertised. This will give you the best results and is 100% safe for your engine.
Your car like all computers will need hardware to run at its peak level. With the Dyno Power performance chip you can achieve this. It may seem small but big things come in small packages.
Please check our store listings for your CAR, BIKE or ATV type. If you cannot find what you are looking for please contact us for assistance. We are always happy to help in any way possible.
Our products are all manufactured by Punk Performance. They are made of the best quality materials; we stamp out the middle man and deliver straight to your door. We have designed our products to be cost effective and for similar performance chips on the market you can pay up to $900.00.
We highly recommend that you give us a try before going on such an expensive adventure. You will not be disappointed.

THIS IS NOT A SIMPLE RESISTANCE MOD
It is a PERFORMANCE CHIP.

This chip will allow you to electronically re-tune the engine the ECU and increase the performance greatly. This modification is fully adjustable and can be tuned to give your engine a Horse Power increase between 0 to 15% depending on your adjustment.
That’s 15Hp per 100Hp you are already running.

Features
Fully adjustable 1-15%
Increase engine output up to 15%
Increases acceleration up to 30%
Higher Top End Speed
Enhanced Throttle Response
Smooth Out flat spots
Can be fitted to an ON/Off switch. (Sold separately)
Working light
No learning time. Turn ON/OFF while driving
No damage to engine
Easy step by step fitting and tunning instructions.
Fit in 20 min
No special tools required

This chip will produce a significant noticeable increase in
Horse Power.
No extra damage or wear and tear will occur from using this modification.

Our instruction guide gives you clear step by step instructions for installing & tunning your performance chip. Most people with a basic mechanical knowledge can install the chip in around 15-20 minutes.
two wires to the IAT or MAF Signal & two wires to the O2 signal
Mismatching wires will not cause damage.

Please note: If you have little or no mechanical knowlege
you will need a copy of your vehicles wiring diagram to install this chip quickly and easily.
Our fittng intructions will help you the rest of the way.

The Dyno Power Performance Chip is LPG, Turbo, Super charger and Diesel friendly. It can also be used in conjunction with other modifications and performance parts.

You will not find more horse power per dollar anywhere in the world.
We offer true noticeable horsepower for the best possible price.

Click that BUY IT NOW link
and
Punk up your ride!