Hyperion Lipo Li-po Battery Charger Discharger Balancer

 This Hyperion EOS 0606i Battery Charger / Discharger with integrated LBA-10 Balancer is a fantastic charger.

No external balancer is required as it's all built in this one neat package.

Works perfectly, has a few minor marks on it but over all as you can see from the photos - it's in good shape.

Comes with a Deans connector & JST XH Balance Adapter which suits Lipos such as Zippy, Dualsky, etc.... Other balance boards are cheaply available.

FREE REGISTERED POST WITH TRACKING NUMBER & INSURANCE IS INCLUDED!

EOS 0606i Special Features

*INPUT power DC 11V~15V either from a battery, car, power supply etc..
*Powerful, yet compact and portable with wide support for battery types
*Integrated Hyperion LBA Balancer for LiPo (3.7v) and LiFe (3.3v) based cells
*Hyperion Balance 2S~6s Multi-Connector Included
*Charge and Discharge Modes (and Cycling for NiMh and NiCd) *Clear and easy-to-read LCD Screen with Warnings common setup errors *Packaged in a rugged aluminum case

Specifications

Input voltage range  11.0-15.0V DC
Appropriate battery types and range of series-connected cells
1-14 NiCd – Nickel-Cadmium cells
1-14 NiMH – Nickel-Metal Hydride cells
1-6 LiPo – Lithium Polymer cells, 100~6000mAh (3.7V/cell type only)
1-6 LiFe – Lithium Iron (3.3V/cell types, inc. A123 brand cells / LiFePO4 cells)
1-6 Lead-Acid cells (2V per cell nominal)

Charge current    0.1A ~ 6.0A MAX, by 100mA steps (50W limit)

Discharge current    0.1A ~ 1.0A MAX, by 10mA steps (5W limit)

Trickle charge current (NiCd, NiMH) 0 ~ 200mA

Charge termination detection -   “Delta V” peak detection for NiCd/NiMH  &  “CV/CC” for Lithium and Lead-Acid Batteries

Cycling Modes (NiCd, NiMH)   Charge>Discharge or Discharge>Charge

Display type   2-line, 16 character blue backlit LCD