QUICK SUMMARY
|
Available |
For immediate delivery |
|
Condition |
Unit is brand new in unopened box and comes with hand mic, manual and pwr cable |
|
Warranty |
Full one year Radio Exchange warranty is applicable |
|
Lay-buy |
Is available (refer terms below) |
|
Trade-ins |
Are welcome (must be Ham Gear less than 10 years old) |
|
Optional Accessories |
Are available in my Ebay Shop |
ICOM 706MK2G DETAILED DESCRIPTION
The '706' series represents one of the most popular transceivers in amateur radio histroy. The incredibly small ICOM 706 Mark II G all-mode transceiver provides 100 watts on HF and 6 meters and 50 watts on 2 meters plus 20 watts on 440 MHz. It receives from 30 kHz to 199 MHz and from 400 to 470 MHz. It features a removable, remoteable, front panel that allows control of all features. The large LCD display features alphanumeric memory names (9 character) and soft key descriptions. The LCD even supports a simple band scope display. Other advanced features include: IF Shift, RIT, Tone Squelch, Scanning, Noise Blanker, Speech Compressor, Mini Spectrum Scope and Electronic Keyer. This version in the 706 series includes the UT106 DSP module as a standard feature. Despite its compact size (6.56" x 2.28" x 7.88"), it has big, easy to use control dials. With HM-103 hand mic. One or two optional filters may be added.
|
Radio Features Summary |
- .03-199 MHz Receive
- Alpha memories
- RIT
- Preamp/ATT
- VFO A/B
- 1 Hz Display
- IF Shift
- Scanning
- S/RF Meter
|
- 100 Watts HF+6M
- 50 Watts 2M, 20 Watts 440
- 100 Memories
- All band Multimode
- Removable head
- Preamp/RF Atten.
- Mini Spectrum Scope
- Electronic Keyer
- SSB Carrier Point
|
The IC-706MK2G adds these new features, not found on the previous IC-706MkII:
Expands to include the 430 MHz band with 20 watts RF
Increases 2 meter RF output to 50 watts
Improved C/N
0.5 PPM with optional high stability crystal
Tone squelch standard
Tone scan
duplex and auto repeater feature
Optional carry handle
Improved receive audio
Backlit keys
SWR graphic display
DSP works even in FM mode
FOR A LIST OF PRICES AND AVAILABILITY PERTAINING TO THESE ACCESSORIES PLEASE GO TO MY EBAY SHOP (THESE ARE THE AVAILABLE OPTIONAL EXTRAS - AND ARE NOT INCLUDED IN THIS SALE UNLESS SPECIFICALLY LISTED ABOVE)
|
Item |
Description |
|
Doss SPS-8400 |
40 Amp Switch Mode Power Supply |
|
AH-4 Unused |
Automatic antenna tuner 120 watts, 80 to 6 meters. |
|
AH-4 Used |
Automatic antenna tuner 120 watts, 80 to 6 meters.
|
|
AT-180 Used |
HF +6M Automatic Tuner.
|
|
Heil Traveller |
Traveller Headset for IC706 |
|
Computer Interface (replaces CT-17) |
CI-V Level Converter. |
|
FL-100 |
Filter 500 Hz CW/RTTY-narrow (9 MHz IF). |
|
FL-101 |
Filter 250 Hz CW (9 MHz IF). |
|
FL-103 |
Filter 2.8 kHz SSB (9 MHz IF). |
|
FL-223 |
Filter 1.9 kHz SSB (9 MHz IF). |
|
FL-232 |
Filter 350 Hz CW (9 MHz IF). |
|
HM-118TN |
Electret condenser DTMF hand mic with Up-Down. Modular plug. |
|
HM-154T |
Electret condenser DTMF hand mic with Up-Down. Modular plug. |
|
MB-62 |
Mobile Mounting Bracket for 706 MkIIG or AT-180. |
|
MB-63 |
Mobile Mounting Bracket for detached Front Panel. |
|
MB-65 |
Mobile Mounting Bracket for Front Panel [Requires MB-63]. |
|
MB-72 |
Carry Handle. |
|
OPC-025D |
DC Power cord |
|
OPC-581 |
Front Panel Separation Cable 11 ft (3.5 m). |
|
OPC-587 |
Front Panel Separation Cable 16 ft (5.0 m). |
|
OPC-589 |
Mic adapter cable (8 pin to modular). |
|
RMK-706 |
Save with this remote kit that includes: MB-62, MB-63 and OPC-581. |
|
SP-10 |
External Mobile Speaker. |
|
SM-20 |
Desk Mic with Up-Down Buttons. [Requires OPC-589] |
|
UT-102 |
Voice Synthesizer announces frequency and mode. |
706 MkIIG Specifications
|
General |
- Frequency Coverage:
- Receive: 0.030 - 199.999 MHz*, 400 - 470 MHz*
- Transmit: 1.8 - 1.999 MHz* 3.5 - 3.999 MHz* 7.0 - 7.300 MHz* 10.1 - 10.150 MHz 14.0 - 14.350 MHz 18.068 - 18.168 MHz 21.0 - 21.450 MHz 24.89 - 24.990 MHz 28.0 - 29.700 MHz 50.0 - 54.000 MHz* 144.0 - 148.000 MHz* 430.0 - 450.000 MHz* * Varies according to version
Mode: USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)
Number of memory channels. : 107 (99 regular, 6 scan edges, 2 call channels)
Antenna connector : SO-239x2 (for HF/50 MHz and 144/430 MHz)/50 ohms
Power supply requirement: 13.8 V ± 15% (negative ground)
Frequency stability: Less than ± 7ppm from 1 min. to 60 min. after power ON. After that rate of stability less than ± 1 ppm/hr. at +25 °C (+77°F). Temperature fluctuations 0°C to +50°C (+32°F to +122°F) less than ±5 ppm.
Current drain: Transmit max. power 20 A; Receive standby 1.8 A, max. audio 2.0 A
Usable temperature range : -10°C to 60°C (14°F to140°F)
Dimensions (projections not included):
- 167(W) X 58(H) X 200(D) mm
- 6-9/16(W) X 2-9/32(H) X 7-7/8(D) in
Weight: 2.45 kg (5 lb 6 oz)
CI-V connector: 2 conductor, 3.5 (d) mm (1/8")
ACC connector: 13 pin
|
|
Transmitter |
|
SSB/CW/RTTY/FM |
AM |
|
HF/50 MHz |
5 - 100 W |
2 - 40 W |
|
144 MHz |
2.5 - 50 W |
2 - 20 W |
|
440 MHz |
2 - 20 W |
2 - 8 W |
|
SSB |
Balanced modulation |
|
AM |
Low level modulation |
|
FM |
Variable reactance modulation |
- Spurious emissions: Less than -60 dB (below 47.5 MHz: -50dB; 47.5 - 50 MHz: -50 to -60 dB; above 50 MHz: -60 dB)
- Carrier suppression: More than 40 dB
- Unwanted sideband: More than 50 dB
- Microphone connector: 8 pin modular jack (600 ohm KEY connector: 3-conductor 6.35 (d) mm (1/4")
- RTTY connector: 3-conductor 3.5 (d) mm (1/8")
|
|
Receiver |
- Receive system:
- SSB/CW/AM/WFM: Double superheterodyne
- FM: Triple superheterodyne
Intermediate frequencies
|
|
1st |
2nd |
3rd |
|
SSB/AM-N/FM |
69.0115 MHz |
9.0115 MHz |
455 kHz (FM only) |
|
CW |
69.0106 MHz |
9.0106 MHz |
- |
|
RTTY |
69.0105 MHz |
9.0105 MHz |
- |
|
AM/FM-N |
69.0100 MHz |
9.0100 MHz |
455 kHz (FM only) |
|
WFM |
70.7000 MHz |
10.7000 MHz |
- |
- Receive sensitivity (preamp on, except 4 - 4.5 and 8 - 9 MHz)
|
|
SSB/CW
10 dB S/N |
AM
10 dB S/N |
FM
12 dB SINAD |
WFM
12 dB SINAD |
|
0.5 - 1.8 MHz |
- |
13 µV |
- |
- |
|
1.8 - 28 MHz |
0.15 µV |
2.0 µV |
- |
- |
|
28 - 29.7 MHz |
0.15 µV |
2.0 µV |
0.5 µV |
- |
|
50 MHz band |
0.12 µV |
1.0 µV |
0.25 µV |
- |
|
76 - 108 MHz |
- |
- |
- |
10.0 µV |
|
144/440 MHz band |
0.11 µV |
1.0 µV |
0.18 µV |
- |
- Squelch Sensitivity (threshold)
|
SSB |
Less than 5.6 µV |
|
FM |
Less than 0.3 µV |
- Selectivity (normal setting)
|
SSB, CW, RTTY |
More than 2.4 kHz/- 6 dB |
|
|
Less than 4.8 kHz/ -60 dB |
|
AM/FM-N |
More than 8.0 kHz/-6 dB |
|
|
Less than 30 kHz/-36 dB |
|
FM |
More than 12 kHz/-6 dB |
|
|
Less than 30 kHz/-60 dB |
- Spurious and image rejection ratio:
- SSB/CW/AM - More than 70 dB
Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
RIT variable range +/-9.99 kHz
PHONES connector: 3-conductor, 3.5 (d) mm (1/8")/8 ohms
EXT SP connector: 2-conductor, 3.5 (d) mm (1/8")/8 ohms
Specifications are subject to change without notice or obligation. |
AUSTRALIAN BUYERS
Our preferred payment method for Australian and New Zealand buyers is direct credit into our bank account. In Australia we have bank accounts with the National (NAB), ANZ and Commonwealth (CBA) banks. We will email you these bank accounts details generally within a few minutes of you making your Ebay purchase. You can then do an internet transfer into one of these bank accounts or take your funds into a branch and pay your funds in directly over the counter.
Australian buyers can also pay with a cheque (note personal cheques take up to 5 days to clear), bank cheque, postal order etc. which can be mailed to us.
NEW ZEALAND BUYERS
We also have a bank account with the ANZ in New Zealand. This means that Kiwi buyers can pay us in New Zealand Dollars (again using your internet banking or by paying in at a branch of the ANZ NZ).
INTERNATIONAL BUYERS
For international buyers our preferred means of payment is Paypal. If paypal is ticked as a payment method we will pay the paypal fees. We sometimes require international buyers to fax / send as an attachment an identification document such as radio license or drivers license which matches the shipping / paypal address. This helps us eliminate internet scammers. Acceptance of any paypal payment is strictly at our discretion.
Our preferred shipper is Australia Post. We ship everything registered and insured. We generally ship within 24 hours of receiving payment.
Regular airmail (insured) is used for our shipments to New Zealand.
Shipping to countries outside of Australasia is generally via Express Courier International (EMS) or via Fed Ex as we prefer to provide online tracking for our international buyers.
We try not to profit from shipping charges - please be aware that the stamp on the box does not include: cost of registration (now $3), cost of insurance, cost of box and packaging material.
radio-exchange.com is a mail order specialist and ships radio equipment all over Australia, to New Zealand and many other parts of the world.
All used equipment sold by radio-exchange.com has an automatic 1 month warranty and all unused equipment has an automatic 1 year warranty. Buyer must pay the cost of freight to our service centre - we pay the return freight.
Our warranty is not voided should you elect to complete basic modifications on your radio (such as fan modifications, general coverage TX mod etc).
radio-exchange.com accepts trade-ins (Amateur Radio equipment less than 10 years old). Feel free to email us with details of your proposed trade-in.
radio-exchange.com offer lay-buy terms to Australian and New Zealand customers. The terms of our lay-buy program are simple - payments must be made into our bank account (no cheques, money orders, postal orders etc), payments can be made for any amount / at any time. Maximum lay-buy period of 3 months. No fees or interest are charged. If transaction is not completed within 3 months, Radio Exchange can either terminate the lay-buy and refund your money or reprice / extend the arrangement if mutually agreed. Buyer must keep a record of payments and email this record to Radio Exchange at completion of the lay-buy. Upon completion of the lay-buy Radio Exchange will then mail the goods to the buyer.
It is a condition imposed by Ebay (at the request of the ACMA) that any radio transmitting equipment be sold to appropriately licensed persons only. If you have any doubts in respect to your licensing status, please feel free to email us for assistance. This sale restriction does not apply to radio related accessories such as receivers, antenna tuners, speakers, power supplies, antennas etc (only equipment that can transmit or amplify transmission of a rad