
Kiln Element Kanthal A1
Building your own small electric kiln and need a spiral wound high temperature element.
For a chamber size of about 200 x 200 x 200mm we suggest the following element supplied by us.
Single spiral element rated at 230-240 volt ac @ 8.5 amps / 2030 watts ---approximate.
Unstretched Coil length approximately = 655 mm
Coil outside diameter = 13 mm
Can be cut into two sections and connected in series.
Coil is stretched to length required to fit the slots that you cut.
Includes 4 ceramic insulator tubes 50mm length x 15 diameter.
Wire pins to hold element in slot.
All items Packed & Posted in Australia Post Packs(Registered)
Parts List
1 Spiral Element
1 1200mm Kanthal A1 Wire to make element Pins
4 Ceramic insulators used for element tails to insulate from casing
4 Element to control wire S/S connectors with crimp lugs
1 Set of Instructions