 Back to home page | | |
|
This listing has ended. The seller has relisted this item or one like this. Item:LAB GRUPPEN FP10000Q FP 10000Q POWER AMPLIFIER -AS NEW! |
|
|
) 
Sydney Music City
Print
Report item
| ||||||
| |||
LAB GRUPPEN FP10000Q - 4 CHANNEL OF TOTAL 10,000W @2 ohms (RRP 14,499.00) FREE POSTAGE VIA REGISTERED POST WITH INSURANCE ANYWHERE IN AUSTRALIA! The Best Amplifier on Earth! Now you could preorder from us with the best price! We have sold 5 units for this year! 100% feedback with customer satisfaction guarantee!
The FP 10000Q is the flagship four-channel model in the FP+ Series. At the core of the FP 10000Q’s performance is a breakthrough advance in Lab.gruppen’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs. Further contributing to the remarkable efficiency of the FP 10000Q is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the extraordinary power density of the FP 10000Q. The FP 10000Q is shipped with a NomadLink® network interface as standard. In conjunction with DeviceControl PC software, NomadLink allows monitoring of all key amplifier parameters and remote control of power on/off, channel mutes, and channel solo functions. (NomadLink requires the separate NLB 60E NomadLink Bridge & Network Controller). More info: http://labgruppen.com/downloads/product/TDS-FP10000Q_V5.pdf Specifications FP 10000Q General Number of channels 4 Peak total output all channels driven 10000 W Peak output voltage per channel 150 V Max. output current per channel 38 Arms Max. Output Power 2 ohms 4 ohms 8 ohms 16 ohms Per ch. (all ch.’s driven) 2500 W 2100 W 1300 W 660 W Bridged per ch. - 3) 5000 W 4200 W 2600 W Performance with Gain: 35 dB and VPL: 150 V THD 20 Hz - 20 kHz for 1 W <0.1% THD at 1 kHz and 1 dB below clipping <0.05% Signal To Noise Ratio >112 dBA Channel separation (Crosstalk) at 1 kHz >70 dB Frequency response (1 W into 8 ohms) +0/-3 dB 6.8 Hz - 34 kHz Input impedance 20 kOhm Input Common Mode Rejection, CMR 45 dB Output impedance @ 100 Hz 56 mOhm Output slew rate into 8 ohms 20 V/microsecond Voltage Peak Limiter (VPL), max. peak output VPL, selectable per ch. 150, 121, 101, 83, 70, 56, 47, 38 V VPL, selectable when bridged 1) 300, 242, 202, 166, 140, 112, 94, 76 VVoltage Peak Limiter mode (per ch.) Hard / Soft Gain and Level Amplifier gain selectable (all channels) 1)– rear-panel switches 23, 26, 29, 32, 35, 38, 41, 44 dB Default gain 35 dB Level adjustment (per ch.) Front-panel potentiometer, 21 position detented from -inf to 0 dB Connectors and Switches Input connectors (per ch.) 3-pin XLR, electronically balanced Output connectors (per ch.) Neutrik Speakon or Binding Posts (must be specified upon order) Output bridge mode A+B, C+D - Ch.’s A and C are signal input source NomadLink ® network On board, 2 x RJ45 EtherCon connectors, IN and OUTIntelligent fans (on/off) Yes, depending on presence of output signal Power on/off and Remote enable on/off Individual switches on front-panel Cooling Two fans, front-to-rear airflow, temperature controlled speed Front-panel indicators: Common NomadLink ® Network; Power Average Limiter (PAL) 2); Power onPer channel Signal present / High-impedance; -20 dB, -15 dB, -10 dB and -4 dB output signal; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute Power Operating voltage, 230 V / 115 V nominal 4) 130-265 V / 65-135 VMinimum power-up voltage, 230 V / 115 V 171 V / 85 V Power Average Limiter (PAL) 2) YesSoft start / Inrush Current Draw Yes / max. 5 A Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock Dimensions (W/H/D) W: 483 mm (19”), H: 88 mm (2 U), Overall D: 396 mm (15.6”), Mounting D: 358 mm (14.1”)Weight 12 kg (26.4 lbs.)Finish Black painted steel chassis with black painted steel / aluminum frontApprovals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCCNote 1) : Automatic -6 dB gain compensation when bridging channels.Note 2) : PAL can reduce the maximum output power to keep the power supply operating safely, and/or to prevent excessive current draw tripping the mains breaker.Refer to Operation Manual. Note 3) : The amplifier will be fully operational at bridge-mode 2 ohm loads, but due to physical constraints in the construction, the max. output power will not besignificantly higher than running individual channels and therefore not stated here. Note 4) : Separate 230 V or 115 V versions available. Not selectable on the amplifier. |
Postage and handling Item location: Sydney, Australia Posting to: Australia
*The estimated delivery time is based on the seller's handling time, the shipping service selected, and when the seller receives cleared payment. Sellers are not responsible for postage service transit times. Transit times may vary, particularly during peak periods.
| ||||||||||||||||
Return policy
| ||
Payment details
| |||||||||
 About eBay | Announcements | Register | Security Centre | Feedback Forum | Site Map | Policies | Help | Contact Us | Advertise | |
Copyright © 1995-2009 eBay Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this Web site constitutes acceptance of the eBay User Agreement and Privacy Policy.
| |