Little Dot Mk V Headphone Amplifier - Now in Australia

The Little Dot MK V Dual-Mono Headphone Amplifier

The Little Dot MK V is a reference quality solid-state headphone amplifier in the Little Dot MK-series. A new "dual-mono" design essentially has dual power sources, dual rectification, dual filters, and dual voltage regulation powering two independent amplifiers, one for each channel! This allows for vastly improved channel separation, reduced cross-talk and minimal intermodulation distortion resulting in expanded sound-stage, imaging precision, and lower overall noise. The Little Dot MK V also provides two inputs so you can connect two sources, and conveniently switch between them via the front panel Input buttons.

The Little Dot MK V's sound performance is equal with it's vacuum tube-based brother, the Little Dot MK IV, albeit with different areas of strength and sonic characteristics. While the Little Dot MK IV has that unforgettable natural warmth, rich mid-range, and vast sound-stage vacuum tubes, the solid-state Little Dot MK V focuses on musical fidelity, full dynamic range, transparency, detail, thundering, impactful bass, as well the sound-stage and imaging ability afforded by the "Dual-Mono" circuit. For those who are perhaps disinclined to the maintenance and mystique of vacuum tubes, and just want exceptional performance without any upkeep, the Little Dot MK V is the headphone amplifier for you!

Little Dot MK V Technical Specifications:

• Dual-Mono design essentially has two independent amplifiers, one for each channel.
  
• Dual-supply transformer, dual rectifier, double filtering, bi-symmetric regulator
  
• MCU for source input switching, ON/OFF protection, stand-by control
  
• Premium Vishay-Dale resistors, Matushita filter capacitors, WIMA coupling capacitors, ALPS-27 Potentiometer, Van Den Hul/American CMC RCA input jacks, OMRON relay
• Includes transient voltage suppression diode to shunt off voltage spikes.
• Frequency Response:
• 10HZ - 100KHz (-0.5dB)
• THD+N: 0.05% (100mW @ 300 ohm, 1KHZ)
  
• Suitable Headphone Impedance: 32 - 600 ohms
• Input Impedance: 20K ohms
  
• Power Output:
• 300 ohms: 187mW
• 32 ohms: 500mW
• DC Offset: R/L +/- 3mV
• Power Consumption: 12W (228V * 0.053A)
  
• Measurements:
• Metric: 275mm (length) by 210mm (width) by 60mm (height)
• Weight:
• 3.5 kg or 7.71 lbs

Dual Input Note: The Little Dot MK V's dual inputs are only designed to be a multiple-source system setup convenience, and not designed to be used as an A/B source comparator where both inputs are active at the same time.

Power Cord Note: Little Dot amplifiers ships with a standard Type-B power cord (American 3-pin or U-ground) suitable for use in areas such as North America, Japan, Taiwan, etc.However, we provide the adaptor to Aus/NZ plug.

PLEASE NOTE:

Buyer are expected to process the payment within 3 days of winning the auction or as soon as possible if it is BUY IT NOW.

Also donot hesitate to asks any questions before actually hit the BUY IT NOW or winning the auction.