MONTE BIANCO MARBLE FLOOR AND WALL TILES WAS $169m2 WOW

SYDNEY

 25 BALMAIN ROAD LEICHHARDT
NSW

 2040

 AUSTRALIA

 TEL: 61 2 9560 6555 FAX: 61 2 9564 3003

Open 7 days

BRISBANE

44-46 ANNERLEY ROAD

WOOLLOONGABBA

 4102

AUSTRALIA

TEL: 61 7 3393 1022 FAX: 61 3 3393 1807

 Open 6 days

MELBOURNE

 87-89 QUEENSBRIDGE STREET

 SOUTHBANK

 3006

 AUSTRALIA

 TEL: 61 3 9682 6555 FAX: 61 3 9686 1871

 Open 6 days

DISTRIBUTION CENTRE LIDCOMBE

 27 NYRANG STREET LIDCOMBE

NSW

 2141

 AUSTRALIA

 TEL: 61 2 9643 8441

 Open Monday to Friday 08:30 am – 4.30 pm

Goods are required to be collected at our Lidcombe distribution centre in Sydney.

If delivery is required, and able to be arranged, based on conditions of delivery area and site conditions, this can be costed for you, and will need to be paid prior to the date of delivery.Our couriers do the metropolitan areas of Sydney, Melbourne and Brisbane. If a delivery is required in the country areas, I recommend use of your local couriers, as they are often a lot cheaper, and do your areas more often.I'm happy to assist with advice on the quantity of pallets and weight of goods. If you require any further information do not hesitate to email me with any questions or you can contact Adele on :0407 405 334 between 12pm and 2pm.

I can also arrange for a small sample to be posted for any serious bidders , if this is required please email me a postal address and contact details.

Have a look at our other material in our eBay "click here "

MONTE BIANCO MARBLE

This marble is known for its soft white shading with cream to light grey veining.

TECHNICAL INFORMATION

Compressive Strength - 129.4Mpa
Water Absorption - 0.07%
Flexural Strength - 4.7 MPa

NATURAL FAULTS AND VARIATION TO EXPECT

• This marble can be extremely brittle, and will contain natural cracks.
• Base colour can vary in tone.
• Veining can vary between grey to beige.
• Natural pitting can occur in this stone.
LAYING INSTRUCTIONS

PLEASE ALWAYS USE A QUALIFED STONE FIXER, EXPERIENCED IN THE
LAYING OF NATURAL STONE.

Because this is a natural stone, every piece is different and the fixer should mix the tiles,
prior to laying any tiles at this stage. Chipped, damaged and naturally marked tiles
should be put aside for cutting in-fills. Please allow 8-10% for wastage.

Floors should be screeded and allowed to dry for 5-8 days, depending on existing
weather conditions. Existing and wooden floors must be rigid, stable and capable of
supporting the additional load without flexing and be in a good condition, ready to accept
stone tiles.

When laying this marble, keep floors free from grit and gravel as this can scratch the
surface of any stone, also keep area clean from contaminates.

PLEASE CONSULT YOUR ADHESIVE COMPANY FOR THE BEST ADHESIVE FOR
THIS NATURAL STONE.

NOTE: As any stone is porous, efflorescence can occur with the use of a cementious
adhesive system, were regular wetting occurs, take care to seal substrates or rendered
walls to eliminate the appearance of efflorescence. If efflorescence does occur, do not
seal tiles until tiles have had sufficient time to cure.

Please consult your experienced stone fixer.

SEALING

INSTALLATION CONSTITUTES ACCEPTANCE OF THE MATERIAL

When sealing, area must first be clear of any leftover dirt, glue, grout and general
building rubbish. There are many more products available on the market; please
research needs and requirements prior to purchasing any stone products and
enhancements, as no responsibility will be taken by Classic Ceramic Importers Pty Ltd
after fixing has commenced.

Natural Looking Finish Penetrating Sealer – Recommendation Only

Is a natural-look, below-surface sealer designed to resist stains. Can also be used as a
pre-grouting sealer over clean tile surfaces. For application methods and suitable
sealers, please consult your sealing company.

Enrich’N’Seal – Recommendation Only

Is a no-sheen, penetrating sealer formulated to darken, enrich and highlight the character
and beauty of natural stones. It rejuvenates the colour and improves the appearance of
worn and weathered material. May also be used as a pre-grouting sealer over clean
stone surfaces. For application methods and suitable sealers, please consult your
sealing company.

Note: Always test products before use.

CLEANING AND MAINTENANCE

Regular and routine cleaning can add to the visual life of your stone. Without care, stone
can end up looking old, dirty and tired. Stains and marks can be visually off-putting and
extreme neglect can result in the un-repairable damage to your stone. Following are
some products to help with the maintenance of natural stone.

Stone Cleaner – Recommendation Only

Is a concentrated, effective neutral cleaner that will not affect existing sealers or wax-type
coating. To be used in the routine maintenance of slate, granite and other natural
stones. For application methods, please consult your sealing company.

Stone Poultice – Recommendation Only

Is a fine, non-acidic, absorbing clay and abrasive cleaning powder, designed for the
removal of deep-set oil and grease stains and light grout haze. For application methods,
please consult your sealing company.

Stone Deep Clean – Recommendation Only

Is a concentrated heavy duty cleaner and degreaser designed to clean heavily neglected
areas. Effectively removes dirt, grease, grime, also removes waxes, and floor finishes.
For application methods, please consult your sealing company.

Note: Always test products before use.

PROBLEM SOLVERS

Eff-Ex – Recommendation Only

Eff-Ex is a heavy-duty, non-acidic cleaner designed to remove efflorescence. When
used as directed, Eff-Ex can inhibit the reoccurrence of remaining efflorescence. Eff-Ex
can be used on natural polished stone, unpolished stone, grout, porcelain and ceramic
tiles.

Note: Always test products before use.

For your information, the following companies can be contacted for any further enquiries
or information. Please take care when selecting products for your natural stone.

Please select and research your stone carefully. Once stone has been installed,
Classic Ceramic Importers Pty Ltd takes no responsibility for variations in colour,
natural flaws, veining, pitting, oxide or rust marks, staining or etching that may
occur in relation to a natural stone product.

No claims will be entertained in these events.