Motorbike Head lifting + Front Conversion + Rear Stands

FRONT CONVERSION KIT

(as shown in picture)

+

FREE SET OF SPOOLS

 Description

• Makes servicing your bike a breeze
• Solid 32mm steel tubing
• The most popular & well tried stands around
• Easy & safe to use

• HEADLIFTER STAND must be used in conjunction with the rear stand
• Comes with 5 pins (sizes:13 /15 /16.5 / 17 /18mm)
• Additional pin sizes available (19/20/21/24/27mm)
• Suits most bikes
• The Head Lifter picks the front of the bike up using the hole in the bottom of the steering stem. Allows the removal of the wheel and forks.
•  Note: Some bikes may have parts which impede access to the steering stem hole. Others may not have a hole at all 

•  REAR STAND is wide enough to lift HONDA CBR600 and CBR1000

• FRONT STAND ADAPTOR KIT can be used to convert the headlifting stand to a under fork paddock stand(as seen in photo)

• FREE SPOOLS are screwed into the holes in your swing arm allowing for an easy lift with the rear stand. Hardened steel bolts are included with each set. 
• Please advise us the make of your bike and colour preference upon purchase
• If the make of your bike is Kawasaki we will send you a standard 10mm set of spools. We take no responsibility that the pitch of the bolts in the spools will suit your bike as Kawasaki is the only make that changes the pitch of the thread pending on models.We are happy to include a set of flat platforms upon your request at the time of purchase so that they can be included in the same parcel as the stand 

• If requested, we can supply flat platforms for your rear stand (at no extra cost) if you haven’t got spools or provisions for spools on your bike, please let us know prior to or at the time of payment, so we can include when dispatching

Shipping 

We post 5 days a week!

About us

 

4 years of trading + Power Seller + 100% Positive Feedback

= Customer Satisfaction!

 YOU CAN CONTACT

US DIRECTLY ON

0414 712 419

sales@kaneg.com.au

 

 Thanks for looking, check out our other items and stay upright !

Parts Installation/Fitment Policy Motorcycles can be dangerous. Kaneg has no control over the use of any part. Kaneg is not responsible or liable for any damages or possible injury incurred, possible accidents due to driver error, incorrect installations, bad judgments or acts of nature. Buyer understands that some parts may need modifications for correct fitment, removal of factory lights, bodywork etc. We recommend you have a skilled technician install the parts purchased. Kaneg expects the customer to exercise good judgment as to the proper selection, installation, use and maintenance of any part.