Secure your network and create VPN access without a Server running within your network*

This is more than just a VPN passthrough Cable/DSL router!

Using *Netgears Prosafe VPN software, you can establish a direct VPN connection to the router and then access the network from there (e.g. Remote Desktop or VNC). The Prosafe software is NOT included though (see http://www.netgear.com/Products/Software/VPNClientSoftware/VPN01L.aspx?detail=Specifications for details). The software is available for approx $50 .

Product Specs:

• Physical Interfaces:

-WAN port: 10BASE-T Ethernet RJ-45 port to

connect to any broadband modem, such as DSL

or cable

- LAN ports: eight (8) 10/100Mbps auto-sensing,

Auto-Uplink‘ RJ-45 ports (one Cat. 5 UTP

cable included)

• Security Features:

- Firewall: Stateful Packet Inspection (SPI) to prevent

Denial of Service (DoS) attacks (Syn flood, ICMP

flood, UDP flood, "ping of death", IP spoofing,

land attack, tear drop attack, IP address sweep

attack, Win Nuke attack), Intrusion Detection

System (IDS) including logging, reporting and

e-mail alerts, address, service and protocol), Web

URL content filtering.

- VPN Functionality: Eight (8) dedicated VPN tunnels,

Manual key and IKE Security Association

(SA) assignment, 56-bit (DES) or 168-bit (3DES)

IPsec encryption algorithm, MD5 or SHA-1

authentication algorithm, pre-shared key, perfect

forward secrecy (Diffie-Helman and Oakley client

support), key life and IKE lifetime time settings,

prevent replay attack, remote access VPN (clientto-

site), site-to-site VPN, IPSec NAT traversal

(VPN pass-through).

- Mode of Operation: Network Address Translation

(NAT), static routing, unrestricted users per port

- IP Address Assignment: Static IP address assign

ment, internal DHCP server on LAN, DHCP

client on WAN, PPPoE client support.

• Management Features:

- Administration interface: Web graphic user interface,

user name and password protected. Smart

Wizard and Install Assistant for basic parameter

settings. Remote management support authenticated

through IP address or IP address range,

and password.

- Configuration and upgrades: Upload and down

load configuration settings, field upgradeable flash

memory and DRAM

• Protocol Support:

-Network: IP routing, TCP/IP, UDP, ICMP

• Protocol Support:

-Network: IP routing, TCP/IP, UDP, ICMP, PPPoE

- IP addressing: DHCP (client and server)

- Routing: RIP v1, RIPv2 (Static Routing,

Dynamic Routing)

- VPN/Security: IPSec (ESP), MD5,

SHA-1, DES, 3DES, IKE

• Application Support:

IPSec pass-through, H.323, Quake, Half-life, Star

Craft Unreal Tournament, PPTP, MIRC, ICQ,

Instant Messenger, RealPlayer, VDO Live, Quick

Time, Dial Pad

• RFC Support:

PPTP client and server (RFC 2637)

IPSec tunnel mode (RFC 2401)

HMAC-MD5-96 (RFC 2403)

HMAC-SHA1-96 (RFC 2404)

DES-CBC Cipher algorithm (RFC 2405)

Encapsulation Security Payload Protocol (RFC 2406)

DHCP server (RFC 2131)

DHCP client (RFC 2131)

TFTP client (RFC 1350)

IP routing (RIP1, RIP2) (RFC 2453)

NAT (many-to-one) (RFC 1631)

Compression Control Protocol (RFC 1974)

IP control Protocol (RFC 1332)

PPPoE (RFC 2516)

• Functions:

DHCP Server (Info and display table), Port Range

Forwarding, Exposed Host (DMZ), Enable/Disable

WAN Ping, DNS Proxy, PPPoE login client

support, WAN DHCP Client, MAC Address

Cloning, NTP Support, URL Content Filtering

(URL and URL keywords)

• Maintenance:

Save/Restore Configuration, Restore Defaults,

Upgrades via Web Browser, Display Statistics

• Hardware Specifications:

- Processor: 50 Mhz ARM 7

- Memory: 1Mb Flash, 16Mb DRAM

- Power requirements: 12VDC, 1.2A

- Dimensions: H: 1.4" (3.5cm) W: 9.95" (25.3cm),

D: 7.1" (18.1cm)

-Weight: 2 lb., 1oz. (.935kg)

• Environmental Specifications:

-Operating temperature: 0 to 40°C

Operating humidity: 90% maximum relative

humidity, noncondensing

All Details at http://kbserver.netgear.com/datasheets/FVS318_ds_v1.2.pdf