|
DIY QUANTITY OF OFFCUTS OF UNITEX POLYSTYRENE FOAMWALL CLADDING
PICK UP ONLY BEAUMARIS MELBOURNE 20 MINS FROM THE CITY
THIS IS AN EXTREMELY EXPENSIVE BUILDING PRODUCT WITH HIGH INSULATION QUALITIES USED AS A REPLACEMENT FOR BRICKS. PRODUCT SPECIFICATION ARE ON THE UNITEX WEBSITE AS SHOWN BELOW:-
These are all the offcuts of polystyrene foam board from a large building project.
TO BUY THIS AMOUNT NEW WOULD COST ABOUT $150 SO GRAB A BARGAIN!
Ideal for:-
-
There is probably enough to insulate a small cubby house, or for making a really well insulated animal hutch!
-
Repairing or patching existing damage to a house or building (then apply render to it)
-
You can also use as an interesting material for a craft project
-
An excellent item for cutting into smaller pieces for packaging fragile items if you are moving house or have lost packaging for the TV or larger items.
-
The polystyrene panels can also be broken down into tiny individual beads which would be ideal for protecting fragile odd shaped items going into the post e.g ceramic figurines or glass christmas decorations.
Measurements of each piece all of which are the top grade of 10cm thick
These are approximate to a mm or two:
Rectangular pieces
1)89cm x 58cm
2)89cm x 85cm
3)Larger odd shaped piece 120cm x 59cm with a small square cut out of one corner which is 25 x 37cm
Triangular pieces
4)66cm x 90 (with longer 3rd side)
5)37cm x 119 (with longer 3rd side)
6) 57 x 117 (with longer 3rd side)
Long thin rectangular strips
10 strips which vary in length from 1 - 1.5 metres and between 10 and 25cm wide. These are all offcuts from around windows so are an ideal packaging material or could be used next to each other to recreate a larger sheet.
5 smaller offcuts of varying sizes and shapes (small bits)
Condition
These are brand new offcuts and are in new condition.
INSPECTION WELCOME AT BEAUMARIS MELBOURNE - CASH ON PICK UP PREFERRED FOR YOUR SAFETY AND MINE
READ MY FEEDBACK AND BID WITH CONFIDENCE!
|