OP COM Opel SAAB Diagnostic Tool Latest Firmware V1.33

• New Firmware Version V01.33 !  Support 2008 Models!
  Support Saab 9-5 and Saab 9-3 CAN
• Covers almost all Opel cars from 1992 - 2008, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B
• OP-COM is a PC based Opel diagnostic program
• This interface can read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming
• The program supports many control units, such as Engine,Automatic Transmission,ABS,Airbag,Engine Cooling module,Instrument Cluster,Electronic Climate Control,Body Control Unit……
• Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication
• PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
• Fault codes will be shown with all available information:Full fault code text description，Full status information (Present, Not present, Intermittent)
• You can print out, save, or copy the fault codes to any other application
• From the fault codes window, you can go directly to the measuring blocks window
• The program shows you measuring block information on many control module, you can choose anything from the list on your own
• The program is capable of showing 8 measuring block parameter simultaneously
• The sample rate is depends mostly on the communication protocol
• For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast
• You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily
• With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking, or alarm
• You can also reset, and program the following immobiliser related items: ECM, BCM, IPC
• You will need the vehicle security code, which can be found on the CAR-PASS
• You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B
• You can code SAB6, and SAB8 airbags with the software
• The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters

Feature

• The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps
• This is the main reason, why only the USB port based interface is available for CAN-BUS

• OP COM Interface
• USB Cable
• Software CD with installation instructions