Phonic Powerpod K12

Ive had this unit a shade over 12 months, purchased new. It has been a great mixer, with far better sound than Behringer equivelants could ever match. The mic pre-amps are actually very nice, which is important to me as I am a vocalist. This unit was used for restaurant and ballroom performances, powering a pair of 400W P.Audio Speakers. It will work a decent crowd!

I am selling as I have upgraded to a new AMP/Mixer combination that is providing me twice the grunt needed for some new outdoor performances I am involved with. I also have a great HK system that I am now using for smaller venues. I really cant say anything bad about the phonic. If you are a soloist, duo or small band, needing about 400W a side, this is a great little beast. Overall a neat and tidy unit, still in very good condition and under warranty for another couple of years. I have had the power supply replaced under warranty, however everything else has been great. There are soem chips on the plastic rear legs, but purely cosmetic. A plastic grommet at the front for the lid to snap into is missing, however the insert it covers still accepts the lid perfectly fine.

Anyway questions, please ask away!

PS: as this is an electronic unit weighing about 12kgs and being I do not have the original packaging, I would prefer local pickup. However, I am open to shipping, though must discuss costs etc, as I want to ensure it is properly packed.

Heres some specs:

Powerpod K-Series powered mixers are compact and versatile with 14 or 16 mono Mic/Line and stereo inputs. They have built-in power stereo amplifiers with selectable output up to 500 watts per channel. The onboard dual 24-bit digital effects processors come with 16 preset programs, main parameter control, tap control and foot switch jacks. A 3-band EQ on every channel and stereo 10-band graphic EQ give you maximum control over your mix. The added feature of Mini Stereo I/O make these mixers perfect for anyone connecting MP3, MD, computer audio or recording devices. Weight has been dramatically reduced with the new high-efficiency switching power supply. The light-weight construction, rugged metal chassis, integrated handle and durable cover combine to make this an ultra-powerful highly-portable all-in-one mixer/amplifier. Extra features of the Powerpod K-16 include feedback detection, vocal eliminator for use in karaoke, and sPs mix enhancer. Powerpod K-Series powered mixers are ideal for use in clubs, houses of worship, convention halls, school auditoriums, and boardrooms.

Features include:

500W + 500W / 4 Ohms stereo power amplifier (bridgeable and patchable)
Dual DFX, our 24-bit digital multi-effect processor with 16 programs plus one main parameter control, tap control and foot switch jack
10 balanced Mic inputs (8 with inserts)
12 Line inputs
Two stereo Line input channels
3-band channel EQ with swept mid-range
Stereo 10-band graphic EQ
Four AUX sends (AUX 2 can be set to pre- or post-fader)
Two stereo returns - each can be routed to AUX 1 & 2 sends (effect to monitor)
Mini Stereo I/O and stereo RCA I/O
+48V individual phantom power switches
Mono output with variable low pass filter from 60 Hz up to 160 Hz
PFL on each input and AFL on each output
Standby switch for playing music between sets
Zone 2 output for side fill or another PA system
Headphone output with separate rotary level control
One SpeakonAR-type connector and two 1/4" phone jacks per channel for speaker connection
Molded protective cover prevents scratching or damage to mixer
Rugged metal main chassis with integrated handle
Less weight achieved by high-efficiency switching power supply.