RX-7 13B Turbo Ric Shaw Built Nurburgring Race Spec RX7

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

This engine has never had oil and obviously has never, ever been started.

This engine (complete including light weight flywheel, Excedy clutch, starter motor and harness) is now surplus to my requirements.

It has new housings, new water pump, new PTS race seals, new bearings, special secrets inside  and is fully balanced and built for racing.

It is only surplus because I am converting my race car to a 6.0 L V8 and that car will race in another category so all my Rotary bits are going, going, going, going .......soon gone from eBay.

This particular item is the “piece de resistance” of my spare parts bin.

Just put in your car, run in sensibly and then insert new plugs, tune and RACE!!!

These engines are built by Ric Shaw Racing for torque, power and most of all RELIABILITY.

Ric has raced this type of engine spec twice at Nurburgring and has finished the 24 hour race both times.

Surley an ultimate test of the 13B Rotary engine.

He has also raced this spec engine in numerous enduro events in Australia and it has never failed to finish.

I personally raced a similar spec engine in all rounds of the Australian Motor Racing Championship last year and the engine performed faultlessly.

At the end of the season we took it in a 300 kilometre endurance race and it was the fastest car all weekend.

Fastest in practice, fastest in qualifying, fastest in the race but alas finished only 4^th outright as the coil packs misfired for more than 85 laps.

This caused 3 extra pit stops to try to fix the problem and put enormous strain on all components but still the engine lasted despite very loud banging noises from the misfire and severe jerking of all components as the spark interrupted the normal firing of the engine.

Despite all this, the engine just kept going and the fastest lap of the weekend was the 4^th last lap – lap no 128 – see www.natsoft.biz for full details

To build an engine like this costs over $10,000 AUD

Donor JDM engine                $2000

Rebuild                                    $7000

Exeddy Clutch                         $1200

Light Flywheel                        $250

Here you can have it for a bargain price.

PS They are also ideal for street use as they start first time easily and idle smoothly. No disadvantage from stock Mazda smoothness.

We recommend and use TNT-A Door to Door Service Australia Wide usually within 2-3 days after despatch ex Sydney

Cost

Approx Shipping Cost for EAST COAST, AUSTRALIA is AUD $245.00.

CHECK OUT MY OTHER ITEMS. I am cleaning out the place and will be listing all sorts of things I thought I would never sell including some race car items, quality game fishing gear, tools, building products etc

This item is located in WINDSOR NSW 2756 and is available for pickup (no extra handling charge) or we will despatch to you worldwide via TNT.

If you are serious I will give you a quote but it takes me 30 minutes of my time to get a quote so please only ask if you are serious.

YOU WILL NOT BE DISAPPOINTED WITH THIS ENGINE!!!!!!!!!!!

THANK YOU!

Powered by eBay Turbo Lister