SOLAR REGULATOR CHARGER MPPT 8A Best performance

SOLAR CHARGER/REGULATOR MPPT 8amp.

Maximum Power Point Tracking solar charge controllers or MPPT solar charge controllers are relatively new to the solar energy industry. These charge controllers are quite different to the traditional PWM solar charge controllers in that they are more efficient and in many cases have more features. MPPT solar charge controllers allow your solar panels to operate at their optimum voltage, improving their performance by as much as 30%. Traditional PWM solar charge controllers reduce the efficiency of one part of your system in order to make it work with another. This MPPT solar charge controllers can accept higher input voltages (up to 55V DC) from your solar array and efficiently down convert the DC voltage to that of your system (e.g. 12v or 24v.) which means you aren't losing any generated power and you are able to use what you generate more efficiently. Additionally, using a much higher DC voltage on the input side (From the panels) allows you to use thinner wire, decreasing your wire cost and making installation easier.

PWM Type Solar Charge Controllers traditional are Pulse Width Modulated, these solar charge controllers have been around for several years and force your solar panels to operate at the same voltage as your battery bank during charging. They are less expensive than MPPT (Maximum Power Point Tracking) solar charge controllers, but they're also far less efficient than the MPPT type. When choosing the right solar charge controller, you'll be best to consider how many panels you are using, what your battery bank power storage capacity will be and how much load your solar power system will be creating. When you are looking at higher voltage systems, you'll want to consider that in today's market the Maximum Point Power Tracking (MPPT) solar charge controller is the more efficient as opposed to the Pulse Width Modulated (PWM) solar charge controllers that has a much lower efficiency. For the long haul the MPPT solar charge controllers are the better investment.

To the best of our knowledge this is the only small size MPPT solar controller available on the market in Australia.

Specifications:

Maximum solar panel voltage: 55V-DC

Maximum battery system:        24V-DC

Maximum charge current:         8A-DC

Electronic current limiting:         8A

Float charge voltage:                13.8V-27.6V

Boost charge voltage:               14.8V-29.6V

Maximum panel size:                12V 96W – 24V 180W