Create the Perfect AV Environment with the Noiseless Hard Disk Drive

Maximize Your Confidence in Data Storage

Samsung recognizes that product reliability is the most important aspect of our HDD and this means PC manufacturers around the globe source their HDD from Samsung.

750GB
7200 RPM
32MB Buffer Memory
SATA II Interface

Features:

Serial ATA 3.0Gbps Interface Support
SATA Native Command Queuing Feature set
Device Initiated SATA Power Management
Fluid Dynamic Bearing Spindle Motor Technology
Staggerd Spin-up Support
High Speed Dual Digital Signal Processor (DSP) Based Architecture
ATA S.M.A.R.T. Compliant
ATA Automatic Acoustic Management Feature Set
ATA 48-bit Address Feature Set
ATA Streaming Feature Set
ATA Device Configuration Overlay Feature Set
NoiseGuard™
SilentSeek™
(1MB = 1,000,000 Bytes. 1GB = 1,000,000,000 Bytes)

?Accessible capacity may vary as some OS uses binary numbering system for reported capacity

High Capacity HDD

NoiseGuard

Samsung has developed and applied NoiseGuard™ technology that is a combined technology to eliminate each noise source or to minimize energy transmission. First, modification of the spindle motor's design minimizes the noise source. In addition, the cover is designed to optimize the flow of air. The Damper utilizes vibration absorbing material, installed on the area of highest density, which maximizes the transmission of energy to the outside.

SilentSeek

Samsung set out to minimize the data seeking noise that has always irritated users, we have developed and applied SilentSeek™ technology, which makes the movement of the head actuator much smoother. While other competing technologies, such as the AAM option, cause performance degradation to lower the noise level, Samsung's SilentSeek™ technology causes virtually no degradation in performance.

ImpacGuard

ImpacGuard™, Samsung's patented technology, is designed to prevent any head actuator vibration during a non-operating environment, which reduces the possibility of collision between the head and the disk even further. Besides, HDD parts can also fail due to corrosion or contamination. Samsung analyzed and eliminated these kinds of problems, at the source, and in advance, by applying the best failure analysis technology adapted from our experience in the semi- conductor business. For example, the microscopic pin holes on the disk surface causes corrosion, which then causes one type of hardware failure. Samsung analyzed this fact to solve the problem in cooperation with our disk component suppliers.

Specifications:

Drive Configuration	Interface		Serial ATA 3.0Gbps
	Bytes per Sector		512
	Buffer DRAM Size2		32 Mbytes
Performance Specifications	Read Seek Time(typical)
	Track to Track		0.8 ms
	Average		8.9 ms
	Full Stroke		18 ms
	Average Latency		4.17 ms
	Rotational Speed		7,200 rpm
	Data Transfer Rate
	Media to/from Buffer (max.)		400/1000 Mbits/s
	Buffer to/from Host(max.)		133Mbytes/s
	Drive Ready Time(typical)		7 sec
Reliability Specifications	Non-recoverable Read Error		1 sector in 1014 bits
	MTBF		500,000 POH
	Start/Stop Cycles (Ambient)		50,000
	Component Design Life		5 years
Acoustics (Average Sound Power)	Idle