Suzuki Hayabusa GSX1300R Seat Cover Blue 2007 embroided

FAQ

Question: What is a Seat or Tank “Skin”?

Answer: Seat and Tank “Skin" is the name that Second Look originated to describe our custom replacement seat covers and tank bras. Our marine-grade vinyl seat and tank skins are manufactured to withstand extreme weather and riding conditions that the stock seats won’t. Our tank bras will protect your tank better than any glue-on pad or sticker.  

Question: Are seat and tank skins easy to install?

Answer: Yes. The Seat Skin centers and edges are marked for easy line-up. A small flat screwdriver, needle-nose pliers, staple gun, and 1/4 staples are all that’s required to install the skin in less than an hour. We do provide seat skin installation at a minimal cost for those who are too busy. Detailed instructions and a customer support phone number are included with each skin. Most tank skins install in less than 5 minutes without removing your tank.  

Question: Can I install the Second Look seat skin over the stock seat upholstery?

Answer: Yes, but we recommend removal of old skin for a tighter fit and a more professional look. Longer staples would be needed to install the skin over the existing seat, and some bulkiness will occur in the corners on the underside of the seat.  

Question: Is it a seat? 

Answer: No, Second Look seat skins are replacement seat covers that are stapled onto the stock seat. The Second Look skin will only fit the factory seat, and WILL NOT fit aftermarket seats that have had the foam re-worked.

Question: Is it a cowl?

Answer: No, but Second Look skins cost much less than color-matched rear cowls. Many of our customers that do run a solo cowl also like the option of switching to the rear seat for carrying passengers or cargo. Since our seat skins come as a set, you get the best of both!

Question: Are they made out of leather? Are they made out of plastic?

Answer: All Second Look products are made using Marine Grade Vinyl! Marine Grade Vinyl is the most resistant to sun fading, water, mildew, gas, oil and scuffing. They are NOT plastic and do NOT have a shiny plastic look, similar to an older bicycle seat which will fade and discolor. 

Question: Is the vinyl painted or dyed?

Answer: No. In the vinyl manufacturing process, the color is permeated into the vinyl, not applied like paint. (Permeated means manufactured with the color blended into the product). This manufacturing process assures the color will not crack, peel or flake off. Second Look has exclusive contracts for certain colors of vinyl from the top manufacturers.  

Question: Will they fade? 

Answer: Of all vinyl materials manufactured, marine vinyl is the most colorfast and the most resistant to fading. In many cases, the paint on the customer’s bike will fade first in extended sun exposure. To protect both the paint and the skin, we

Recommend using a colorfast bike cover. 

Question: Will the white vinyl stay white?

Answer: Yes, if it is cleaned frequently with the recommended cleaner. Marine vinyl is also the most dirt resistant vinyl made.

Question: Is the color a perfect match to my bike?

Answer: Paint and vinyl are two totally different properties, and must be viewed that way. Paint has the ability to show “depth” and “candy” as it is applied in coats. Vinyl color is permeated, (manufactured into the material) similar to rubber products. Customer’s expectations vary, but we solicit opinions from riders before the final color and pattern is put into production. The number one comment we receive is “It looks so much better than the stock black seat.” 

Question: Can I put skins for a different bike on mine?

Answer: Each model is specifically patterned for a precision fit on that model. Skins are interchangeable only with bikes in which the seat/tank is of the identical shape. Attempting to fit a skin from one bike to another with a dissimilar seat/tank will usually distort the skin at best. Aftermarket seats will not take a Second Look skin as they are shaped differently than stock seat foam. 

Question: Why are Tank Skins the better choice?  

Answer: Stick-on tank pads, besides not offering much protection for your tank also don’t last very long. They are made of the cheapest materials available. Magnetic tank pads collect metal and dirt particles that will scratch the tank.  

Question: Do I need to remove my tank?

Answer: In most cases no. Nylon hooks built into the tank skin slide under the edges of the tank. The front bungee rests ON TOP of the front tank bracket. Several models require that you may need to lift one end of the tank for ease of installation.

Question: How much of the tank do the Tank Skins cover?

Answer: Full tank bras are available on certain models! Most tank skins cover between 1/2 and 5/8 of the tank. The top of the bra starts as close to the rear of the gas cap as possible, and covers the back and the lower section of the rear of the tank. We always try to leave the brand logos exposed when it does not compromise fit or function.  

Question: Will they scratch the tank?

Answer: No, but dirt will. If there is any dirt between the tank and the tank skin, it will have an abrasive action, Dirt between your knees and the tank or tank skin will also have abrasive action. The surface between the tank and the inside of the tank skin MUST be kept clean and waxed with a high quality wax. Your seat and tank skin can be hand washed with mild soap and lukewarm water and left to air dry. Use only “Vinyl Finish” vinyl cleaner on the exterior of your skins. 

Made in the USA. 

If you have any further questions please email.