TB-20 Model Plane Trainer Brushless LiPo 2.4GHz RTF

Brand New TB-20 TRINIDAD Model Plane Trainer kit.

The TB-20 TRINIDAD comes as a Ready-To-Fly kit requiring no building. To fly you just need to fit the propellor and spinner, fit the main landing wheels, screw on the wing to the fuselage, screw on the tailplane, check the balance point is correct, charge the LiPo battery, fit 8xAA batteries to the Transmitter and your flying.

This model is suitable as both a first Trainer and aerobatics Trainer because it is very easy to fly but also has great control and can perform all basic aerobatics such as loops, inverted flight and rolls. Its steerable nose wheel gives great control for takeoffs and taxiing on the ground. 

This kit includes the new 2.4GHz interference free transmitter system.

Wingspan: 1040mm        Length: 780mm     Flying Weight: ~540grams 

Included in the TB-20 TRINIDAD package is:

TB-20 TRINIDAD plane made from moulded foam and pre-painted.

4 Channel 2.4GHz Spread Spectrum radio control system with receiver and 3 servos installed in the plane (ailerons, elevator and rudder/nose wheel)

Brushless motor and speed controller powered by 7.4Volt 1800mAh 15C LiPo battery

8" x 6" propeller and plastic spinner

12Volt input LiPo Balancing Charger with input lead for connection to 12Volt battery

Instruction manual

 This model airplane is not a toy and is not suitable for flyers under 16 years. Incorrect operation may causes serious injury or damage. We will not be responsible for any accident.