TL Audio Indigo Series 2011 2 Channel 4 band Valve EQ

2011 2 Channel 4 band Valve Equaliser - amazing unit for gently enhancing your recordings with warmth and natural EQ or to boldly control and shape sounds with great colouration or overdrive distortion. This unit has a wide pallet. You can run it as a 2 ch mono or stereo unit or combine both channels for a single mono channel with even greater EQ control. This is the same quality as the Classic Blue series EQ2 but without the Mic Preamps so they are smaller 1 rack unit and much more affordable. With circuitry and facilities based on the original EQ-1 valve equaliser, the 2011 is our most compact and user friendly valve EQ to date. Incorporating TL's famously musical high and low frequency shelves and four broad-curved frequencies on each of the mid bands, the 2011 is your easiest route to EQ heaven! Employing four ECC83 / 12AX7A valve stages per channel (one as a voltage amplifier and the other three stages in the EQ section) running at 150v DC, the 2011 exhibits the wide bandwidth and low noise performance that characterises every TL Audio product. ● LF band: ±12dB shelving at 80Hz or 120Hz (12dB/oct) ● LM band: ±12dB peaking at 250Hz, 500Hz, 1kHz or 2.2kHz (Q=0.5) ● HM band: ±12dB peaking at 1.5kHz, 2.2kHz, 3.6kHz or 5kHz (Q=0.5) ● HF band: ±12dB shelving at 8kHz or 12kHz (12dB/oct) ● Continuously variable input gain (-20dB to +20dB) ● Dual sensitivity auxiliary input (for guitar / keyb etc) ● Balanced XLR line inputs and outputs (+4dB) ● Line inputs and outputs duplicated on unbalanced jack connectors (- 10dB) ● EQ bypass switch with status LED ● Peak LED indicates amount of valve effect ● Frequency response 20Hz to 40kHz +0 / -1dB SPECIFICATIONS Line Input: (Balanced) Impedance >5k. Gain range -20dB to +20dB. Maximum input level +26dBu. Balanced XLR connector. (Unbalanced) Impedance > 5k. Gain range -20dB to +20dB. Max input level +12dBu. Jack connector. Aux Input: Switchable for high or low gain, plus 40dB gain variation. Max input level +18dBu. Unbalanced jack connector. Output: Balanced output impedance: 47. Max level: +26dBu into 600. XLR connector. Unbalanced output impedance: 47. Max level: +18dBu into 10k. Jack connector. Frequency response: 10Hz to 40kHz +0 / -1dB. Noise: -80dBu Distortion: 0.05%. For more information go to http://www.bigdocs.co.uk/tlaudio/docs/archive/old_site/indigo.pdf If you wish to see the unit before making a bid please call Paul on 0412686252 or 03-94177707 to make a time to see it at Studio 52 Melbourne. It can be picked up from Studio 52 in Collingwood Victoria upon sale or freighted to anywhere in Australia if required.