Overall Diameter: 28.7cm (11 5/6")
Hole Diameter: 267mm (10 1/2")
Actual Flap Dimensions: 18cm wide x 17cm high
Use as a standard cat door or upgrade to the electronic cat door at any time. Battery adaptor unit and additional magnet collar units are sold separately via our eBay store.
Installation Instructions
Transcat Cat Doors are designed to fit into glass doors and panels from 3-6mm of thickness. Installation into most ranch slider type doors is also pssible where there is a clearance of more than 21mm on the inside of the sliding door. A circular hole, 267mm in diameter, is cut by a Glazier and your Transcat fitted.
Transcat Cat Doors may also be fitted to solid wooden panels and doors. The ring is not required. Installation is very similar for the Cat Door only, i.e. without the electronic unit. Fit the Door with self tapping screws (not supplied) to the face of the panel. The hole size should be 247mm in diameter. The Transcat Especial (electronic) Cat Door requires a 3-6mm thick supporting material such as plywood instead of glass. This is positioned over a suitably sized hole cut in the wooden door.
Track up to 10 items on this computer in 
)
)
