VT commodore air conditioning compressor, reciever 5ltr

 Car air conditioning compressor replacement to suit Commodore 5.0 ltr V8 VT - VX / Y 

Including brand new Filter drier and two new compression O-Rings which are both, essential when fitting a new compressor.

Replacement for Model number 5262

Compressor comes pre-oiled and ready to fit with instructions and a 12 month warranty from one of Australia's largest compressor specialists.

BE very careful when choosing a replacement compressor for your 5.0 ltr VT.

Original vehicle fit to the VT was a Delphi V5 compressor model number 1135262. The “V5” part of the number is the type of compressor. It is a 5 cylinder variable swash plate type of compressor that uses a pressure sensitive control valve to adjust the angle of the swash plate and there for the length of piston throw from no pump to 100% pump. The original compressor was made out of the Delphi factory and Holden experienced thousands of warranty issues with them over the entire production run of the VT. The main three problems were leaking front seals, a premature wear of the adjustable pivot point causing them to go to the no pump position and a faulty discharge leaf valve plate that would break the rivets on the plate and cause equalised suction and discharge pressure. Delphi tried several times to fix the various problems but never particularly successfully. The probable reason you are looking for a new pump is because your original has done exactly this. BUY THE SAME TYPE OF COMPRESSOR AND YOU MAY EXPERIENCE THE SAME FAULT AGAIN!

Our VT compressor have come from a different factory and all the problem issues have been rectified to ensure long lasting service. They are the compressor of choice for the Trade throughout Australia and have been sold with out issues for many years.

WHY RISK ANOTHER FAILURE?

Get ready for the summer now!

If this is not the compressor you are after, send us your request and we WILL be able to help you!