|  |
 |
|
SOLAR PANELS, WIND TURBINES, HYBRID 24VOLT SYSTEMS
|
|
|
THIS DEAL INCLUDES:
ONE 500WATT WIND TURBINE
ONE 600WATT HYBRID SOLAR/WIND POWER WIND TURBINE CONTROL & REGULATOR KIT
EMAIL: hybridpoweraust@gmail.com
Phone Mark: 0429 175112
Wind Turbine Comes With a two year Warranty.
This wind turbine is made with simple reliable technology, however it is common for the Chinese controllers to fail.
The Australian controller comes with a two year warranty with online and telephone support.
Wind Turbine Generator
The unit is quite massive and ruggedly built.
The 62kg unit features a 3 phase permanent magnet alternator with a serious 2.1 meter diameter 3 blade rotor. The unit will withstand wind speeds of 40m/sec (144km/hr). All mechanical components are either cast steel or aluminium.
Included is 4.5 meters of tower piping, tower base, guy wires, steel rope clamps and other mounting hardware. Some skill is required in construction e.g. concreting, mechanical assembly and rigging.
The unit is made in China clearly for a remote application. Alas, the instructions are woeful but assembly’s straightforward.
Wind turbines provide far, far more power per $ - provided you have wind. Most places however have some wind over a 24 hour period. If you have been looking for a decent wind generator but have been scared off by the price this product is for you.
Note: The product is supplied in three wooden crates, with a combined weight of 71.5kg.
PICK UP AVAILABLE FROM MORNINGTON PENINSULA VICTORIA NO EXTRA CHARGE
PICK UP AVAILABLE FROM MELBOURNE VICTORIA EXTRA $25.
QUOTES AVAILABLE FOR ANY WHERE ELSE. WE DO NOT MAKE MONEY ON FRIEGHT SO IF YOU CAN MAKE YOUR OWN ARRANGEMENTS THIS IS ALSO OK.
Specifications:
Rated Power: 500 watts
Max Power: 900 watts
Output Voltage: 28V X Controller
Turbine Start Speed: 1m/s
Max Wind Speed: 40m/s
Rotor Dia: 2.1 meters
No of Blades: 3
Recommended Minimum Tower Height: 4.5 meters
Weight of Generator: 62kg
Shipping case dimensions: Case 1 74 x 44 x 26cm (Weight: 45kg)
Case 2 154 x 24 x 13 mm (Weight: 24kg)
Case 3 37 x 27 x 15cm (Weight: 2.5kg)
Gross weight packed in 3 cases: 71.5k
REGULATOR (AUSTRALIAN MADE)
HYBRID POWER 600 WATT SOLAR/WIND REGULATOR
MODEL NUMBER: EB010207
CAN BE MODULATED WITH OTHER HP REGULATORS TO CONTROL UP TO 50KVA POWER SYSTEMS.
USES GENUINE LARGE GOLD PLATED TERMINALS.
INCORPORATES THE LATEST IN MOSFET TRANSISTOR SWITCHING TECHNOLOGY.
USES NO POWER IN STANDBY POSITION
SAFELY DISPLACES POWER ONCE BATTERY SYSTEM IS CHARGED.
PROTECTS ALL POWER INVERTERS AND BATTERIES FROM HIGH POWERED WIND SURGES.
SIMPLE TO INSTALL RESIST DAMAGE FROM INCORRECT INSTALLATION,
REVERSE POLARITY PROTECTION
SOLID STEEL CASING
COMES WITH TWO YEAR MANUFACTURERS WARRANTY
ONLINE AND TELEPHONE SUPPORT.
REGULATOR DESIGNED TO WORK IN CONJUNCTION WITH SOLAR POWER SYSTEM.
YOU MAY ADD UP TO 80 WATTS OF SOLAR POWER TO YOUR WIND TURBINE WITH OUT ADDING ANOTHER REGULATOR MODULE. IF YOU NEED TO REGULATE A BIGGER SYSTEM, YOU CAN ORDER EXTRA REGULATOR MODULES THROUGH OUR ONLINE STORE.
WIND TURBINE RECTIFIER MODULE (AUSTRALIAN MADE)
Designed for wind turbines rated at up to 500 Watts 12 or 24 Volt systems
The typical signal generated from a small Domestic Wind Turbine is Three Phase Alternating Current.
In order to use the Turbine to charge Batteries for a remote power system you require a single phase direct current signal.
Our rectifier modules uses three 35 Amp Bridge rectifiers heat sink to a substantial purpose built alloy heat sink which can handle 3000 watt surges at 24 Volts.
Product uses genuine gold plated terminals for high conductivity and durability.
Product comes with a user manual incorporating big pictures for an easy installation guide.
Product comes with a Two Year Warranty with online and telephone Support
TESTIMONIALS
best buy ever rebel 551
extreme service and advise you wont get a better deal anywhere AAAA+++++++ mowcamp1
great product dazzamski
recomend. helpful advice cooperative and understanding. excellent backup. AAA+++ bongo_rob
|
|
|
Hybrid Power has been in the business of manufacturing Hybrid Solar Wind regulators for over two years. Our new product range has been designed in association with Wiltronics Research and Parish Engineering & Co P.L.
In 2006 we were awarded funding by the Australian Federal Government to manufacture an off-the-shelf affordable HYBRID SOLAR/WIND REGULATOR. Our management has had more than twelve years experience in the manufacturing,distribution and installation of solar regulators and other solar powered products . For all enquiries please email us at : hybridpoweraust@gmail.com or CALL OUR Managing Director MARK LUCAS ON: MOBILE: 0429 175112 If Telstra are having network problems please leave a message.
|
|
|
|
|
 |  |
|
Track up to 10 items on this computer in 
)
